Riegler 101629

Proportional control valve »pulstronic II«, 3-way design, with control circuit, 24 V DC, G 1/8, DN 1, Pressure range 0 - 10 bar. For electronic pressure controlCompact, electropneumatic pressure regulating valve which converts an electronic signal to a pneumatic pressure.It is particularly suited for precise pressure regulation as well as for pressure control in conjunction with a constantflow due to its internal control loop with electronic pressure feedback.Operating principle:Two pulsed pilot valves change the pressure in the control chamber.A downstream pressure booster converts the pilot pressure into an outlet pressure.The outlet pressure is measured with a pressure sensor and fed into the internal control loop.The setpoint is established over the electrical plug-in connector as a standard signal (0 to 10 V).

B [mm]	46.5
DN	1.0
Electrical setpoint	0 - 10 V, 0 - 20 mA, 4 - 20 mA
Failsafe behaviour	Maintenance of press. in case of loss of voltage-non control
Flow rate [l/min]	13
Flow rate measurement	At P2 = 6 bar
H [mm]	105.6
Housing	POM
Hysteresis	< 1% FS
Internal parts	POM
Max. ambient temperature [°C]	50
Max. medium temperature [°C]	60
Max. working pressure [bar]	10
Medium	Air or neutral gases, filter.50 µm, lubricat. or unlubricat.
Min. ambient temperature [°C]	0
Min. medium temperature [°C]	0
Min. working pressure [bar]	0
Operation	Pulsed 3/2-way valves
Page No.	WEB
Piloting	0 - 10 V
Reproducibility	± 0.5% FS
Sealant	NBR, FPM
Thread	G 1/8