We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand in Saudi Arabia. The private labels and part numbers shown on this website are the property of their respective owners.
Material: | Filler Added PTFE Layer |
Sintered Bronze Layer | |
Steel-backed Metal Layer (EN 1.0330 Equiv.: Tin Plating) | |
Allowable Temperature: -195 ~ 280�C |
Part Number | - | L |
MDZB8 | - | 5 |
Part Number | L | D | T | * Shaft Diameter | ||||||||||||||||||
Tolerance | Tolerance | |||||||||||||||||||||
Type | d | Ref. Dim. | Tolerance | |||||||||||||||||||
Straight Type MDZB | 3 | 3 | 4 | 5 | 6 | 5 | +0.047 +0.017 | 1.0 | 0 -0.025 | 3 | -0.025 -0.034 | |||||||||||
4 | 3 | 4 | 5 | 6 | 8 | 6 | +0.047 +0.017 | 1.0 | 0 -0.025 | 4 | -0.025 -0.037 | |||||||||||
5 | 3 | 4 | 5 | 6 | 8 | 7 | +0.055 +0.025 | 1.0 | 0 -0.025 | 5 | -0.025 -0.037 | |||||||||||
6 | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 8 | +0.055 +0.025 | 1.0 | 0 -0.025 | 6 | -0.025 -0.037 | |||||||||
8 | 5 | 6 | 8 | 10 | 12 | 15 | 10 | +0.055 +0.025 | 1.0 | 0 -0.025 | 8 | -0.025 -0.040 | ||||||||||
10 | 6 | 8 | 10 | 12 | 15 | 20 | 12 | +0.060 +0.030 | 1.0 | 0 -0.025 | 10 | -0.025 -0.040 | ||||||||||
12 | 6 | 8 | 10 | 12 | 15 | 20 | 14 | +0.060 +0.030 | 1.0 | 0 -0.025 | 12 | -0.025 -0.043 | ||||||||||
13 | 8 | 10 | 12 | 15 | 20 | 15 | +0.060 +0.030 | 1.0 | 0 -0.025 | 13 | -0.025 -0.043 | |||||||||||
15 | 8 | 10 | 12 | 15 | 20 | 25 | 17 | +0.065 +0.035 | 1.0 | 0 -0.025 | 15 | -0.025 -0.043 | ||||||||||
16 | 10 | 12 | 15 | 20 | 25 | 18 | +0.070 +0.035 | 1.0 | 0 -0.025 | 16 | -0.025 -0.043 | |||||||||||
18 | 10 | 12 | 15 | 20 | 25 | 30 | 20 | +0.075 +0.040 | 1.0 | 0 -0.025 | 18 | -0.025 -0.043 | ||||||||||
20 | 10 | 12 | 15 | 20 | 25 | 30 | 23 | +0.080 +0.045 | 1.5 | 0 -0.030 | 20 | -0.025 -0.046 | ||||||||||
22 | 10 | 12 | 15 | 20 | 25 | 30 | 25 | +0.080 +0.045 | 1.5 | 0 -0.030 | 22 | -0.025 -0.046 | ||||||||||
25 | 10 | 12 | 15 | 20 | 25 | 30 | 35 | 28 | +0.085 +0.050 | 1.5 | 0 -0.030 | 25 | -0.025 -0.046 | |||||||||
30 | 12 | 15 | 20 | 25 | 30 | 35 | 40 | 50 | 34 | +0.090 +0.050 | 2.0 | 0 -0.030 | 30 | -0.025 -0.046 | ||||||||
35 | 20 | 25 | 30 | 35 | 40 | 50 | 39 | +0.095 +0.055 | 2.0 | 0 -0.030 | 35 | -0.025 -0.050 | ||||||||||
40 | 12 | 15 | 20 | 25 | 30 | 35 | 40 | 50 | 44 | +0.095 +0.055 | 2.0 | 0 -0.030 | 40 | -0.025 -0.050 | ||||||||
50 | 20 | 25 | 30 | 35 | 40 | 50 | 60 | 55 | +0.105 +0.060 | 2.5 | 0 -0.030 | 50 | -0.025 -0.050 |
D | * Housing Dia. H7 | I.D. Tolerance after press fit (Reference Value) |
3~6 | + 0.012 0 | + 0.062 0 |
7~10 | + 0.015 0 | + 0.065 0 |
11~18 | + 0.018 0 | + 0.068 0 |
19~20 | + 0.021 0 | + 0.071 0 |
21~30 | + 0.081 0 | |
31~50 | + 0.025 0 | + 0.085 0 |
51~80 | + 0.030 0 | + 0.110 0 |