We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand in Saudi Arabia. The private labels and part numbers shown on this website are the property of their respective owners.
Part Number | - | L |
JZB10 | - | 12 |
Part Number | L | D | Chamfer | *1 Housing Dia. | *1 Shaft Diameter | ||||||||||||||||||
Type | d (Tolerance after press fitting) | a | b | Ref. Dim. | Tolerance (H7) | Ref. Dim. | Tolerance (H7) | ||||||||||||||||
Straight JZB | 3 | +0.080 +0.030 | 3 | 4 | 5 | 5 | +0.107 +0.032 | 1* | C0.3 | 5 | + 0.012 0 | 3 | 0 - 0.010 | ||||||||||
4 | +0.095 +0.045 | 3 | 4 | 5 | 6 | 6 | +0.107 +0.032 | 1* | C0.3 | 6 | + 0.012 0 | 4 | 0 - 0.012 | ||||||||||
5 | +0.095 +0.045 | 3 | 4 | 5 | 6 | 8 | 7 | +0.157 +0.045 | 1* | C0.3 | 7 | + 0.015 0 | 5 | 0 - 0.012 | |||||||||
6 | +0.095 +0.045 | 4 | 5 | 6 | 8 | 10 | 8 | +0.157 +0.045 | 1* | C0.3 | 8 | + 0.015 0 | 6 | 0 - 0.012 | |||||||||
8 | +0.120 +0.060 | 5 | 6 | 8 | 10 | 12 | 15 | 10 | +0.157 +0.045 | 1 | C0.3 | 10 | + 0.015 0 | 8 | 0 - 0.015 | ||||||||
10 | +0.120 +0.060 | 6 | 8 | 10 | 12 | 15 | 20 | 12 | +0.193 +0.058 | 1 | C0.3 | 12 | + 0.018 0 | 10 | 0 - 0.015 | ||||||||
12 | +0.120 +0.060 | 8 | 10 | 12 | 15 | 20 | 14 | +0.193 +0.058 | 1 | R0.4 | 14 | + 0.018 0 | 12 | 0 - 0.018 | |||||||||
15 | +0.120 +0.060 | 10 | 12 | 15 | 20 | 25 | 17 | +0.193 +0.058 | 1 | R0.4 | 17 | + 0.018 0 | 15 | 0 - 0.018 | |||||||||
16 | +0.120 +0.060 | 10 | 12 | 15 | 20 | 25 | 18 | +0.193 +0.058 | 1 | R0.4 | 18 | + 0.018 0 | 16 | 0 - 0.018 | |||||||||
18 | +0.120 +0.060 | 12 | 15 | 20 | 25 | 30 | 20 | +0.221 +0.071 | 1 | R0.4 | 20 | + 0.021 0 | 18 | 0 - 0.018 | |||||||||
20 | +0.145 +0.075 | 15 | 20 | 25 | 30 | 23 | +0.221 +0.071 | 1 | R0.4 | 23 | + 0.021 0 | 20 | 0 - 0.021 | ||||||||||
22 | +0.145 +0.075 | 20 | 30 | 25 | +0.231 +0.081 | 1 | R0.4 | 25 | + 0.021 0 | 22 | 0 - 0.021 | ||||||||||||
25 | +0.170 +0.090 | 20 | 25 | 30 | 28 | +0.231 +0.081 | 1 | R0.4 | 28 | + 0.021 0 | 25 | 0 - 0.021 | |||||||||||
30 | +0.170 +0.090 | 20 | 25 | 30 | 40 | 34 | +0.290 +0.095 | 1 | R0.4 | 34 | + 0.025 0 | 30 | 0 - 0.021 | ||||||||||
35 | +0.215 +0.115 | 25 | 30 | 40 | 39 | +0.290 +0.095 | 1 | R0.4 | 39 | + 0.025 0 | 35 | 0 - 0.025 | |||||||||||
40 | +0.215 +0.115 | 30 | 40 | 50 | 44 | +0.340 +0.115 | 2 | R0.6 | 44 | + 0.025 0 | 40 | 0 - 0.025 | |||||||||||
50 | +0.235 +0.135 | 30 | 40 | 50 | 55 | +0.430 +0.130 | 2 | R0.8 | 55 | + 0.030 0 | 50 | 0 - 0.025 | |||||||||||
* When selecting 3-3, 3-4, 4-3, 4-4, 4-6, 5-3, 5-4, 6-4 and 6-5, a=0.5. d tolerance is the value after press fitting into ring gauge of d�0.002. *1 Housing diameters and shaft diameters listed here are recommended dimensions. I.D. Tolerance is guaranteed value after press fit. |