MISUMI LSPAHBC6-L[10-50/0.01]-P[3-4/0.01]-B[2-12/0.1]

Material	Surface Treatment	Hardness	Threaded	Tapped	Pilot
EN 1.1191 Equiv.	Black Oxide	-	LSPC	LSPA	LSPB
EN 1.1191 Equiv.	Hard Chrome Plating	-	LSPRC	LSPAR	LSPBR
EN 1.1191 Equiv.	Black Oxide	Treated Hardness: 45 ~ 50HRC	LSPHBC	LSPAHB	LSPBHB
EN 1.1191 Equiv.	Hard Chrome Plating	Treated Hardness: 45 ~ 50HRC	LSPHRC	LSPAHR	LSPBHR
EN 1.4301 Equiv.	-	-	LSPSUC	LSPASU	LSPBSU
EN 1.4125 Equiv.	-	Treated Hardness: 50 ~ 55HRC	LSPSCC	LSPASC	LSPBSC

Hard Chrome Plating: Plating Hardness: 750HV ~, Plating Thickness: 3µm or more EN 1.4301 Equiv. may not be polished and may have no centering hole. Specifications

Part Number	-	L	-	P	-	B	-	E	-	A
LSPCA10	-	L20.01	-	P4.05	-	B5	-	E2.0	-	A15
LSPBC12	-	L25.01	-	P8.00	-	B10

Tapped, Threaded Recommended Tightening Torque (Reference)

M (Coarse)	Tightening Torque N cm
M3	147
M4	333
M5	676
M6	?1156
M8	?2803
M10	?5557
M12	?9702
M16	24108
M20	46942

Tightening torque (reference) will be within Strength Class of Tightening Torque on Technical Data >>?P. 2297 (10.9). Not applicable when using locking materials or lock washers.

Part Number	L 0.01mm Increment	P 0.01mm Increment	B 0.1mm Increment	E 0.1mm Increment (Shape A only)	A Selection (Shape A only)	R (Shape C)	d	M (Coarse)	F	M1 (Coarse)	?1	W	?2
Type	Tip Shape	D
Threaded LSPC LSPRC LSPHBC LSPHRC LSPSUC LSPSCC	Tapped LSPA LSPAR LSPAHB LSPAHR LSPASU LSPASC	Pilot LSPB LSPBR LSPBHB LSPBHR LSPBSU LSPBSC	A B C	6	10.00~50.00	3.00~4.00	2.0~12.0	0.5~10.0	15 30 45 60	1	3	3	1.5	M3	-	5	8
8	3.00~6.00	2.0~15.0	5	5	2	7
10	20.00~80.00	4.00~8.00	2.0~20.0	1.5	6	6	3	6	8
12	4.00~10.00	2.0~20.0	8	8	4	M5	10	10
15	5.00~10.00	2.0~25.0	2	10	10	5	9	13
20	8.00~15.00	2.0~30.0	3	12	12	5	M8	17
25	10.00~15.00	2.0~30.0	4	16	16	5	20

For Pilot Type, D dimension 10 or more is available. Note the strength of undercut part for Tapped and Pilot.>>?P.1566