We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand in Saudi Arabia. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
JPPHTA6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1]
Description
Large Head/Tapered/Plastic Tip
Stock availability:
On request
Material No. | Pin | Head | Type | D Tolerance and Shape Code | |
Material | Hardness | Plastic Material | |||
EN 1.2510 Equiv. | Treated Hardness: 60 ~ 63HRC | MC Nylon | JPPH | B (Press Fit, m6) PB (Press Fit, p6) TA (Tapped, g6) NA (Threaded, g6) | |
EN 1.4301 Equiv. | - | SJPPH | |||
EN 1.4125 Equiv. | Treated Hardness: 50 ~ 55HRC | CJPPH |
Part Number | P | L | B | |||||||
- | - | - | ||||||||
Type | Shape | D | ||||||||
JPPH | B | 8 | - | P10.00 | - | L10 | - | B5.5 | ||
CJPPH | TA | 16 | - | P25.00 | - | L22 | - | B13.0 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | m | x | ? | Unit Price | ||||||
Type | Shape Code | D | D dim. Tolerance | EN 1.2510 Equiv. Hardened JPPHB JPPHPB | EN 1.4301 Equiv. SJPPHB SJPPHPB | EN 1.4125 Equiv. CJPPHB CJPPHPB | ||||||||
m6 | p6 | |||||||||||||
JPPH SJPPH CJPPH | B (m6) PB (p6) | ?5 | +0.012 +0.004 | +0.020 +0.012 | 5.50~8.00 | 5~10 | 2.0~10.0 | 1 | 5 | 4 | 1 | |||
?6 | 6.50~10.00 | 6~12 | 2.0~12.0 | |||||||||||
?8 | +0.015 +0.006 | +0.024 +0.015 | 9.00~13.00 | 8~16 | 2.0~15.0 | 1.5 | ||||||||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | 2 | ||||||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~16.00 | 12~24 | ||||||||||
13 | 14.00~18.00 | 13~26 | 5.0~20.0 | 2 | ||||||||||
16 | 17.00~25.00 | 16~32 | 3 | 6 | 5 | |||||||||
20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 20~40 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | x | M (Coarse) | * Tightening Torque N cm | ? | Unit Price | |||||
Type | Shape Code | D | D dim. Tolerance g6 | EN 1.2510 Equiv. Hardened JPPHTA | EN 1.4301 Equiv. SJPPHTA | EN 1.4125 Equiv. CJPPHTA | ||||||||
JPPH SJPPH CJPPH | TA | ?5 | -0.004 -0.012 | 5.50~8.00 | 5~10 | 2.0~10.0 | 5 | 4 | M2 | - | 3 | |||
?6 | 6.50~10.00 | 6~12 | 2.0~12.0 | M3 | 147 | 5 | ||||||||
?8 | -0.005 -0.014 | 9.00~13.00 | 8~16 | 2.0~15.0 | M5 | 676 | 8 | |||||||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | |||||||||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | |||||||||||
13 | 14.00~18.00 | 13~26 | 5.0~20.0 | M6 | 2803 | 9 | ||||||||
16 | 17.00~25.00 | 16~32 | 6 | 5 | ||||||||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | x | M (Coarse) | * Tightening Torque N cm | Unit Price | |||||
Type | Shape Code | D | D dim. Tolerance g6 | EN 1.2510 Equiv. Hardened JPPHNA | EN 1.4301 Equiv. SJPPHNA | EN 1.4125 Equiv. CJPPHNA | |||||||
JPPH SJPPH CJPPH | NA | ?5 | -0.004 -0.012 | 5.50~8.00 | 3~10 | 2.0~10.0 | 5 | 4 | M5 | 676 | |||
?6 | 6.50~10.00 | 3~10 | 2.0~12.0 | M6 | 1156 | ||||||||
?8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 2.0~15.0 | M8 | 2803 | |||||||
10 | 11.00~15.00 | 5~15 | 3.0~20.0 | M10 | 5557 | ||||||||
12 | -0.006 -0.017 | 13.00~16.00 | 8~15 | M12 | 9702 | ||||||||
16 | 17.00~25.00 | 8~20 | 5.0~20.0 | 6 | 5 | M16 | 24108 | ||||||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | M20 | 46942 |