We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand in Saudi Arabia. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
CLPSQAH3-L[3-20/0.1]
Description
Straight/Sphere/Standard/Tapped
Stock availability:
On request
Material No. | Material | Surface Treatment | Hardness | Type | |
Press Fit | Tapped | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | LPSQA | LPSQTA | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GLPSQA | GLPSQTA | |
EN 1.2510 Equiv. | - | - | BLPSQA | BLPSQTA | |
EN 1.4301 Equiv. | - | - | SLPSQA | SLPSQTA | |
EN 1.4301 Equiv. | Hard Chrome Plating | Plating Hardness: 750HV ~ | HLPSQA | HLPSQTA | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CLPSQA | CLPSQTA |
Part Number | - | L | |||
Type | Tolerance | D | |||
LPSQA | M | 6 | - | L14.0 | |
BLPSQTA | G | 8 | - | L29.3 |
D | Standard Grade | |||
M | P | G | H | |
m6 | p6 | g6 | h7 | |
1~3 | +0.008 +0.002 | +0.012 +0.006 | -0.002 -0.008 | 0 -0.010 |
4~6 | +0.012 +0.004 | +0.020 +0.012 | -0.004 -0.012 | 0 -0.012 |
8, 10 | +0.015 +0.006 | +0.024 +0.015 | -0.005 -0.014 | 0 -0.015 |
Part Number | L 0.1mm Increment | C | Unit Price | |||||||
Type | D Tol. | D | EN 1.2510 Equiv. Hardened LPSQA | Harda EN 1.2510 Equiv. GLPSQA | EN 1.2510 Equiv. BLPSQA | EN 1.4301 Equiv. SLPSQA | Hard EN 1.4301 Equiv. HLPSQA | EN 1.4125 Equiv. CLPSQA | ||
LPSQA GLPSQA BLPSQA SLPSQA HLPSQA CLPSQA | M (m6) P (p6) G (g6) H (h7) | 1 | 3.0~10.0 | 0.1 | ||||||
2 | 3.0~20.0 | 0.5 | ||||||||
3 | ||||||||||
4 | 1 | |||||||||
5 | 5.0~30.0 | |||||||||
6 | ||||||||||
8 | 5.0~40.0 | 1.5 | ||||||||
10 | 2 |
Part Number | L 0.1mm Increment | M (Coarse) | * Tightening Torque N•cm | ? | Unit Price | |||||||
Type | D Tol. | D | EN 1.2510 Equiv. Hardened LPSQTA | Hard EN 1.2510 Equiv. GLPSQTA | EN 1.2510 Equiv. BLPSQTA | EN 1.4301 Equiv. SLPSQTA | Hard EN 1.4301 Equiv. HLPSQTA | EN 1.4125 Equiv. CLPSQTA | ||||
LPSQTA GLPSQTA BLPSQTA SLPSQTA HLPSQTA CLPSQTA | M (m6) P (p6) G (g6) H (h7) | 5 | 10.0~30.0 | M2 | - | 3 | ||||||
6 | M3 | 147 | 5 | |||||||||
8 | 15.0~40.0 | M5 | 676 | 8 | ||||||||
10 |