MISUMI AFPDPC4-P[4.5-8/0.01]-L[3-16/1]-B[1-15/0.1]

Material	Hardness	Press Fit	Tapped	Threaded
m6	p6	g6	g6
High Hardness Stainless Steel	35HRC~	AFPDC	AFPDPC	AFPDTC	AFPFNA

Specifications

	Part Number	D	-	P	-	L	-	B
Press Fit	AFPDC	6	-	P8.97	-	L12	-	B3.5
Tapped	AFPDTC	8	-	P9.25	-	L15	-	B8.6
Threaded	AFPFNA	5	-	P7.80	-	L8	-	B4.0

Press Fit

Part Number	P 0.01mm Increment	L 1mm Increment	B 0.1mm Increment	?1	C	Unit Price
Type	D	d dim. Tolerance	AFPDC AFPDPC
m6	p6
AFPDC (m6) AFPDPC (p6)	2	+0.008 +0.002	+0.012 +0.006	2.50~8.00	3~16	2.0~15.0	0	0.5
3	3.50~8.00	1
4	+0.012 +0.004	+0.02 +0.012	4.50~8.00	1
5	5.50~8.00
6	6.50~10.00
8	+0.015 +0.006	+0.024 +0.015	8.50~10.00

When L=3, C=0.5,?1=1. Tapped

Part Number	P 0.01mm Increment	L 1mm Increment	B 0.1mm Increment	M (Coarse)	* Recommended Tightening Torque N • cm	?2	C	Unit Price
Type	D	D dim. Tolerance g6	AFPDTC
AFPDTC	6	-0.004 -0.012	6.50~10.00	6~16	2.0~15.0	M3	147	5	1
8	-0.005 -0.014	8.50~10.00	8~16	M4	333	6	1.5

Note the strength of under-head part. >>P.1566 Please confirm pilot hole depth on >>P.1566. Holes may go through. * Tightening torque (reference) will be within Strength Class of Tightening Torque on Technical Data >>P.2297 (10.9). Not applicable when using locking materials or lock washers. Threaded

Part Number	P 0.01mm Increment	L 1mm Increment	B 0.1mm Increment	C	M (Coarse)	* Recommended Tightening Torque N • cm	ML	Unit Price
Type	D	D dim. Tolerance g6	AFPFNA
AFPFNA	3	-0.002 -0.008	3.50~8.00	3~10	2.0~15.0	0.5	M3	?147	4.5
4	-0.004 -0.012	4.50~8.00	1	M4	?333	6
5	5.50~8.00	M5	?676	7.5
6	6.50~10.00	M6	1156	9
8	-0.005 -0.014	8.50~10.00	4~10	M8	2803	12

When L=3, C=0.5,?1=1. * Tightening torque (reference) will be within Strength Class of Tightening Torque on Technical Data >>P.2297 (10.9). Not applicable when using locking materials or lock washers. Alterations