MISUMI SSEL2BNL10L-[116-274/1]

Precautions for Use Blocks are equipped with retainers (wire) to prevent balls from falling off. For how to handle the blocks, see >>P.525. Radial clearances and accuracies are not guaranteed if the blocks and rails are interchanged from the original set combinations. Straight grooves are provided on datum planes. Be sure to match the datum lines when using. Rails cannot be connected end to end. The accuracy of Linear Guides is guaranteed after mounting the rail (after fastening screws on the rail and pushing it onto the datum plane). Minor bending of the rail will be adjusted after being mounted and will not affect the performance. Accessory • H8 comes with cap screws (M2x6). Others • Filled with Lithium soap based grease (Multemp Grease PS2 by Kyodo Yushi Co., Ltd. ). • For operating life calculation, see >>P.527. • For operating life calculations, use our free calculation software from http://download.misumi.jp/mol/fa_soft.html. • The MX type is greased with a lithium complex grease (TOUGHLIX GREASE MP2, made by JXTG Nippon Oil & Energy Corporation).

Material Hardness	Type	MX (Lubrication Unit)	L Dimension	Number of Blocks
Light Preload
High Grade
Standard Materials	Stainless Steel 56HRC~	SSELBN	Blank: None -MX: Provided	Selectable	1
SSEL2BN	2
SSELBNL	Configurable	1
SSEL2BNL	2
	Carbon Steel 58HRC~	SELBN	-	Selectable	1
SEL2BN	2
SELBNL	Configurable	1
SEL2BNL	2

Heat Resistant Temperature: -20 ~ 80C Specifications

Part Number	-	L
SSELBN10 SSELBN-MX10 SSELBN10L SSELBN10G	- - - -	275 275 75 75	(With Lubrication Unit) (L Type Greased) (G Type Greased)

Alternative grease types available. >> P.531

Part Number	L	Block Dimension	Dowel Hole Dimensions	Guide Rail Dimension
Type	MX	H	W	L1	B	C	Sx?	L2	K	Cb	N	C2	(?1)	W1	W2	H1	Ca	Counterbored Hole	F	G
d1xd2xh
Dimensions in ( ) are for 2-Block Type.	-	8	40~130 (100)	17	32	12	13	M2x2.5	22	6.5	0.3	8.5	13	2	7	5	4.7	0.3	2.4x4.2x2.3	15	5
Stainless Steel Standard Specifications SSELBN SSEL2BN SSELBNL SSEL2BNL	Carbon Steel SELBN SEL2BN SELBNL SEL2BNL
Blank: None -MX: Provided (for stainless steel only)	10	55~275 (115)	20	40	15	16	M3x3	29	7.8	0.3	10	16	2.5	9	5.5	5.5	0.3	3.5x6x3.5	20	7.5
13	70~470 (120)	27	45.8	20	20	M3x3.5	31.8	10	0.5	13.5	20	3	12	7.5	7.5	0.5	3.5x6x4.5	25	10
16	110~670 (150)	32	58.3	25	25	M3x4	43.3	12	0.5	16	25	4	15	8.5	9.5	0.5	3.5x6x4.5	40	15
20	160~700 (220)	40	67.7	30	30	M4x6	52.3	15	0.5	20	30	4	20	10	11	0.5	6x9.5x5.5	60	20

Alterations