MISUMI SSEBNLZ-MX10-[36-274/1]

Precautions for Use Blocks are equipped with retainers (wire) to prevent balls from falling off. For how to handle the blocks, see >>P.525. Radial clearances and accuracies are not guaranteed if the blocks and rails are interchanged from the original set combinations. Straight grooves are provided on datum planes. Be sure to match the datum lines when using. Rails cannot be connected end to end. The accuracy of Linear Guides is guaranteed after mounting the rail (after fastening screws on the rail and pushing it onto the datum plane). Minor bending of the rail will be adjusted after being mounted and will not affect the performance. Accessory • H8 comes with cap screws (M2x6). Others • Filled with Lithium soap based grease (Multemp Grease PS2 by Kyodo Yushi Co., Ltd. ). • For operating life calculation, see >>P.527. • For operating life calculations, use our free calculation software from http://download.misumi.jp/mol/fa_soft.html. • The MX type is greased with a lithium complex grease (TOUGHLIX GREASE MP2, made by JXTG Nippon Oil & Energy Corporation).

Material Hardness	Type	MX (Lubrication Unit)	L Dimension	Number of Blocks
Light Preload	Slight Clearance
High Grade	Standard Grade
Standard Materials	Stainless Steel 56HRC~	SSEBN	SSEBNZ	Blank: None -MX: Provided	Selectable	1
SSE2BN	SSE2BNZ	2
SSEBNL	SSEBNLZ	Configurable	1
SSE2BNL	SSE2BNLZ	2
	Carbon Steel 58HRC~	SEBN	SEBNZ	-	Selectable	1
SE2BN	SE2BNZ	2
SEBNL	SEBNLZ	Configurable	1
SE2BNL	SE2BNLZ	2

Heat Resistant Temperature: -20 ~ 80C Specifications

Part Number	-	L
SSEBN10 SSEBN-MX10 SSE2BNL10L SSE2BNL10G	- - - -	275 275 100 100	(With Lubrication Unit) (L Type Greased) (G Type Greased)

Alternative grease types available. >> P.531

Part Number	L	Block Dimension	Dowel Hole Dimensions	Guide Rail Dimension
Type	MX	H	W	L1	B	C	Sx?	L2	K	Cb	N	C2	(?1)	W1	W2	H1	Ca	Counterbored Hole	F	G
d1xd2xh
Dimensions in ( ) are for 2-Block Type.	-	8	40~130 (70)	17	23.6	12	8	M2x2.5	13.6	6.5	0.3	8.5	8	2	7	5	4.7	0.3	2.4x4.2x2.3	15	5
Stainless Steel Standard Specifications SSEBN SSE2BN SSEBNL SSE2BNL Carbon Steel SEBN SE2BN SEBNL SE2BNL	SSEBNZ SSE2BNZ SSEBNLZ SSE2BNLZ SEBNZ SE2BNZ SEBNLZ SE2BNLZ
Blank: None -MX: Provided (for stainless steel only)	10	35~275 (95)	20	30	15	10	M3x3	19	7.8	0.3	10	10	2.5	9	5.5	5.5	0.3	3.5x6x3.5	20	7.5
13	45~470 (120)	27	33.9	20	15	M3x3.5	19.9	10	0.5	13.5	14	3	12	7.5	7.5	0.5	3.5x6x4.5	25	10
16	70~670 (150)	32	42.4	25	20	M3x4	27.4	12	0.5	16	20	4	15	8.5	9.5	0.5	3.5x6x4.5	40	15
20	100~700 (160)	40	50	30	25	M4x6	34.6	15	0.5	20	25	4	20	10	11	0.5	6x9.5x5.5	60	20

Alterations