MISUMI SJPRSPB3-[2-3/1]

Material No.	Material	Surface Treatment	Hardness	Type
Press Fit (m6)	Press Fit (p6)	Tapped
	EN 1.2510 Equiv.	-	Treated Hardness: 60 ~ 63HRC	JPRSB	JPRSPB	JPRSTB
	EN 1.2510 Equiv.	Hard Chrome Plating Plating Thickness: 3µm or more	Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~	GJPRSB	GJPRSPB	-
	EN 1.4301 Equiv.	-	-	SJPRSB	SJPRSPB	SJPRSTB
	EN 1.4125 Equiv.	-	Treated Hardness: 50 ~ 55HRC	CJPRSB	CJPRSPB	-

Specifications

Part Number	-	P
Type		D
JPRSB		10	-	6

Press Fit

Part Number	P Selection	L	B	C	?	E	Unit Price
JPRSB JPRSPB	GJPRSB GJPRSPB	SJPRSB SJPRSPB	CJPRSB CJPRSPB
Type	D	D dim. Tolerance
m6	p6
m6 JPRSB GJPRSB SJPRSB CJPRSB	p6 JPRSPB GJPRSPB SJPRSPB CJPRSPB	?3	0.01?	0	?2	?3												?5	?3	0.5	1	3
?4	0.02	0	?2	?3	?4											1
?5	?2	?3	?4	?5										10	?5
?6		?3	?4	?5	?6									4
?8	0.02	0			?4	?5	?6	?8								15	?6	1.5	5
10					?6	?8	10							?8	2
12	0.03	0						?8	10	12						6
13								12	13					22	2
16								12	13	14	15	16		10	3	7
20	0.03	0.1											15	16	20	30

Tapped

Part Number	P Selection	L	B	E	M (Coarse)	* Tightening Torque N•cm	?	Unit Price
Type	D	D dim. Tolerance g6	JPRSTB	SJPRSTB
JPRSTB SJPRSTB	?6	-0.016			?4	?5	?6									10	5	5	M3	?147	?5
?6T			?4	?5	?6									M2.6	-	?4
?8	-0.019					?6	?8								15	6	M4	?333	?6
?8T					?6	?8								M3	?147	?5
10						?8	10							8	M5	?676	?8
12	-0.023						?8	10	12						6
13								12	13					22	M8	2803	12
16								12	13	14	15	16		10	7
20	-0.027											15	16	20	30

Pins of D dimension with T have one size smaller thread diameter and larger wall thickness. (Actual D dimension is the number without "T".) Note the strength of under-head part. >>P.1566 Please confirm pilot hole depth on >>P.1566. Holes may go through. * Tightening torque (reference) will be within Strength Class of Tightening Torque on Technical Data >>P. 2297 (10.9). Not applicable when using locking materials or lock washers. Alterations