We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand in Saudi Arabia. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SHPST2-12-P[2.5-4/0.01]
Description
Locating Pilot Pins/Standard
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
| Material | Hardness | B Fixed | B Configurable | |||
| Press Fit | Tapped, Flathead Slot | Press Fit | Tapped | |||
| Without Flathead Slot | Flathead Slot | |||||
| EN 1.2510 Equiv. | Treated Hardness: 60 ~ 63HRC | HPST | HPSTM | HPSF | HPSFS | HPSFM |
| EN 1.4301 Equiv. | - | SHPST | SHPSTM | SHPSF | - | SHPSFM |
| EN 1.4125 Equiv. | Treated Hardness: 50 ~ 55HRC | CHPST | CHPSTM | CHPSF | CHPSFS | CHPSFM |
| Part Number | - | L | - | P | - | B |
| HPST5 HPSF4 | - - | 15 10 | - - | P7.20 P5.05 | - | B1.20 |
| Part Number | L Selection | P 0.01mm Increment | B | E | ? | M (Coarse) | * Tightening Torque N • cm | Unit Price | ||||||||||
| Type | D | D dim. Tolerance | HPST | SHPST | CHPST | HPSTM | SHPSTM | CHPSTM | ||||||||||
| Standard HPST SHPST CHPST | Tapped Flathead Slot HPSTM SHPSTM CHPSTM Applicable when D≥5. | 1 | +0.012 +0.007 | 12 | 1.50~3.00 | 1 | 3 | 3 | - | - | - | - | - | |||||
| 2 | 12 | 2.50~4.00 | 4 | - | - | - | ||||||||||||
| 3 | 12 | 15 | 4.00~6.00 | 2 | - | - | - | |||||||||||
| 4 | 12 | 15 | 5.00~7.00 | 5 | - | - | - | |||||||||||
| 5 | 12 | 15 | 6.00~8.00 | M3 | 147 | |||||||||||||
| 6 | 12 | 15 | 7.00~9.00 | 6 | ||||||||||||||
| 8 | 15 | 18 | ?9.00~13.00 | 3 | M4 | 333 | ||||||||||||
| 10 | 15 | 18 | 11.00~15.00 | M5 | 676 |
| Part Number | L Selection | P 0.01mm Increment | B 0.01mm Increment | E | ? | Unit Price | ||||||||||||
| Type | D | D dim. Tolerance | HPSF | SHPSF | CHPSF | |||||||||||||
| HPSF SHPSF CHPSF | 1 | +0.012 +0.007 | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 1.50~3.00 | 1.00~5.00 | 3 | 1 | |||||
| 2 | 4 | 5 | 6 | 8 | 10 | 12 | 2.50~4.00 | 1.00~10.00 | 4 | |||||||||
| 3 | 5 | 6 | 8 | 10 | 12 | 15 | 4.00~6.00 | 1.00~10.00 | ||||||||||
| 4 | 5 | 6 | 8 | 10 | 12 | 15 | 5.00~7.00 | 1.00~10.00 | 5 | |||||||||
| 5 | 5 | 6 | 8 | 10 | 12 | 15 | 6.00~8.00 | 1.00~10.00 | ||||||||||
| 6 | 6 | 8 | 10 | 12 | 15 | ?7.00~10.00 | 1.00~12.00 | 6 | ||||||||||
| 8 | 8 | 10 | 12 | 15 | ?9.00~13.00 | 1.00~15.00 | ||||||||||||
| 10 | 10 | 12 | 15 | 18 | 11.00~15.00 | 1.00~20.00 |
| Part Number | L Selection | P 0.01mm Increment | B 0.01mm Increment | E | M (Coarse) | * Tightening Torque N • cm | Unit Price | ||||||||||||
| Type | D | D dim. Tolerance g6 | HPSFS | CHPSFS | HPSFM | SHPSFM | CHPSFM | ||||||||||||
| Without Flathead Slot HPSFS CHPSFS | Flathead Slot HPSFM SHPSFM CHPSFM | 5 | -0.004 -0.012 | 6 | 8 | 10 | 12 | 15 | 6.00~8.00 | 1.00~10.00 | 5 | M3 | 147 | ||||||
| 6 | 6 | 8 | 10 | 12 | 15 | 7.00~10.00 | 1.00~12.00 | 6 | |||||||||||
| 8 | -0.005 -0.014 | 8 | 10 | 12 | 15 | 18 | 9.00~13.00 | 1.00~15.00 | M4 | 333 | |||||||||
| 10 | 10 | 12 | 15 | 18 | 11.00~15.00 | 1.00~20.00 | M5 | 676 |
