MISUMI SFPDSTC6T-P[4-6/0.01]-L[8-12/1]-B[2-12/0.1]

Material No.	Material	Surface Treatment	Hardness	Type
P Selectable	P Configurable	P, L, B Configurable
	EN 1.2510 Equiv.	-	Treated Hardness: 60 ~ 63HRC	JPDSTB	JPDSTC	FPDSTC
	EN 1.2510 Equiv.	Hard Chrome Plating Plating Thickness: 3m or more	Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~	-	-	GFPDSTC
	EN 1.4301 Equiv.*	-	-	SJPDSTB	-	SFPDSTC
	EN 1.4125 Equiv.	-	Treated Hardness: 50 ~ 55HRC	-	CJPDSTC	CFPDSTC

* For P Selectable Type, it is EN 1.4301 Equiv. equivalent. Specifications

Part Number	-	P	-	L	-	B
JPDSTC6 FPDSTC6	- -	4.00 P4.00	-	L10	-	B5.5

P Selectable

Part Number	P Selection	L	B	M (Coarse)	* Tightening Torque N cm	?	C
Type	D	D dim. Tolerance g6
JPDSTB SJPDSTB	?6	-0.004 -0.012	4					10	?3	M3	?147	?5	0.5
?8	-0.005 -0.014		6				12	?4	M4	?333	?6	1
10			8			16	?5	M5	?676	?8
12	-0.006 -0.017				10		20	?6	1.5
16				10	14	24	10	M8	2803	12	3

P Configurable

Part Number	P 0.01mm Increment	L	B	M (Coarse)	* Tightening Torque N cm	?	C
Type	D	D dim. Tolerance g6
JPDSTC CJPDSTC	?6	-0.004 -0.012	4.00~6.00	10	?3	M3	?147	?5	0.5
?6T	M2.6	-	?4
?8	-0.005 -0.014	6.00~8.00	12	?4	M4	?333	?6	1
10	?7.00~10.00	16	?5	M5	?676	?8
12	-0.006 -0.017	?7.00~12.00	20	?6	1.5
13	?8.00~13.00	22	10	M8	2803	12	2
16	10.00~16.00	24	10	3
20	-0.007 -0.020	13.00~20.00	32	20

P, L, B Configurable

Part Number	P 0.01mm Increment	L 1mm Increment	B 0.1mm Increment	M (Coarse)	* Tightening Torque N cm	?	C
Type	D	D dim. Tolerance g6
FPDSTC GFPDSTC SFPDSTC CFPDSTC	?6	-0.004 -0.012	4.00~6.00	?8~12	2.0~12.0	M3	?147	?5	0.5
?6T	M2.6	-	?4
?8	-0.005 -0.014	6.00~8.00	11~16	2.0~15.0	M4	?333	?6	1
10	?7.00~10.00	11~20	3.0~20.0	M5	?676	?8
10T	?8~16	M4	?333	?6
12	-0.006 -0.017	?7.00~12.00	12~24	3.0~20.0	M5	?676	?8	1.5
12T	?8~18	M4	?333	?6
13	?8.00~13.00	13~26	5.0~20.0	M8	2803	10	2
13T	10~20	M6	1156	?9
16	10.00~16.00	16~32	5.0~20.0	M8	2803	12	3
16T	10~24	M6	1156	?9
20	-0.007 -0.020	13.00~20.00	20~40	5.0~20.0	M8	2803	12
20T	12~30	M6	1156	?9

Pins of D dimension with T have one size smaller thread diameter and larger wall thickness. (Actual D dimension is the number without "T".) Note the strength of under-head part.?>>?P.1566?Please confirm pilot hole depth on >>P.1566. Holes may go through. * Tightening torque (reference) will be within Strength Class of Tightening Torque on Technical Data >>P. 2297 (10.9). Not applicable when using locking materials or lock washers. Alterations