MISUMI MPBR6-10

Material: High Tensile Brass Alloy Solid Lubricant Embedded Specifications

Part Number	-	L
MPBR12 MPBP20	- -	12 15

Part Number	L	MPBR	MPBRU
Type	dE7	Dr6 (*1)	Thickness (N)	Dr6 (*1)	Thickness (N)
MPBR MPBRU * L dimensions in ( ) are only available for MPBR.	5	+0.032 +0.020	8	10	(12)	(15)							9	2	7	1
6	8	10	12	15	16	(20)					10	8
8	+0.040 +0.025	8	10	12	15	16	(20)					12	10
10	(8)	10	12	15	16	(20)	(25)				14	12
12	+0.050 +0.032		(10)	12	15	16	20	(25)				18	3	15	1.5
15			12	15	16	20	(25)				21	18
16			12	15	16	20	25	(30)	(40)		22	20	2
20	+0.061 +0.040				15	16	20	25	30	(40)	(50)	28	4	24
25					16	20	25	30	(40)	(50)	33	29
30					16	20	25	30	(40)	(50)	38	34

Tolerance H7 (* 2) to D dimensions (* 1) is recommended for housing diameter.

D	O.D. r6 (* 1)	Housing Dia. H7 (* 2)
7~10	+0.028	+ 0.015
+0.019	0
11~18	+0.034	+ 0.018
+0.023	0
19~30	+0.041	+ 0.021
+0.028	0
31~50	+0.050	+ 0.025
+0.034	0

Copper Alloy Bushings: I.D. Variations after Press-Fitted (Reference) Inner Diameter after press-fit is almost equal to I.D. F7 O.D. m6 Type. (See below for I.D. Variations after press-fitted) Housing Diameter Tolerance: H7

Type	I.D. E7 O.D. r6	I.D. F7 O.D. m6
Standard	99.84%	99.95%
Thin Wall	99.83%	99.94%

Data above are obtained by test, not guaranteed.