MISUMI SSEBLZ10-[36-274/1]

�Precautions for Use Blocks are equipped with retainers (wire) to prevent balls from falling off. For how to handle the blocks, see >>P.525. Radial clearances and accuracies are not guaranteed if the blocks and rails are interchanged from the original set combinations. Straight grooves are provided on datum planes. Be sure to match the datum lines when using. Rails cannot be connected end to end. The accuracy of Linear Guides is guaranteed after mounting the rail (after fastening screws on the rail and pushing it onto the datum plane). Minor bending of the rail will be adjusted after being mounted and will not affect the performance. �Accessory • H6 comes with Number 0, Class 1 Phillips button head screws (M2x6). • H8 comes with cap screws (M2x6). �Others • Filled with Lithium soap based grease (Multemp Grease PS2 by Kyodo Yushi Co., Ltd. ). • For operating life calculation, see >>P.527. • For operating life calculations, use our free calculation software from http://download.misumi.jp/mol/fa_soft.html. • The MX type is greased with a lithium complex grease (TOUGHLIX GREASE MP2, made by JXTG Nippon Oil & Energy Corporation).

Material Hardness	Type	MX (Lubrication Unit)	L Dimension	Number of Blocks
Light Preload	Slight Clearance
High Grade	Precision Grade	Standard Grade
Industry Standard Materials	Stainless Steel 56HRC~	SSEB	SSEBV	SSEBZ	Blank: None -MX: Provided	Selectable	1
SSE2B	SSE2BV	SSE2BZ	2
SSEBL	SSEBLV	SSEBLZ	Configurable	1
SSE2BL	SSE2BLV	SSE2BLZ	2
	Carbon Steel 58HRC~	SEB	SEBV	SEBZ	-	Selectable	1
SE2B	SE2BV	SE2BZ	2
SEBL	SEBLV	SEBLZ	Configurable	1
SE2BL	SE2BLV	SE2BLZ	2

Heat Resistant Temperature: -20 ~ 80�C H6 is for stainless steel only. H6 has no standard grade / precision grade. Specifications

Part Number	-	L
SSEB10 SSEB-MX10 RSEB10 SSEB10L SSEB10G	- - - - -	275 275 75 75 75	(With Lubrication Unit) (LTBC Plating) (L Type Greased) (G Type Greased)

LTBC Plating and various Grease types available as alternative. >> P.531

Part Number	L	Block Dimension	Guide Rail Dimension
Type	MX	H	W	L1	B	C	Sx?	L2	K	Cb	W1	W2	H1	Ca	Counterbored Hole	F	G
d1xd2xh
Stainless Steel Industry Standard Specifications SSEB SSE2B SSEBL SSE2BL Carbon Steel SEB SE2B SEBL SE2BL	SSEBV SSE2BV SSEBLV SSE2BLV SEBV SE2BV SEBLV SE2BLV Dimensions in ( ) are for 2-Block Type.	SSEBZ SSE2BZ SSEBLZ SSE2BLZ SEBZ SE2BZ SEBLZ SE2BLZ	-	6	25~100 (70)	12	17.4	8	-	M2x1.5	9.7	4.5	0.3	5	3.5	4	0.3	2.4x3.5x1	15	5
8	40~130 (70)	17	23.6	12	8	M2x2.5	13.6	6.5	0.3	7	5	4.7	0.3	2.4x4.2x2.3	15	5
Blank: None -MX: Provided (for stainless steel only)	10	35~275 (75)	20	30	15	10	M3x3	19	7.8	0.3	9	5.5	5.5	0.3	3.5x6x3.5	20	7.5
13	45~470 (95)	27	33.9	20	15	M3x3.5	19.9	10	0.5	12	7.5	7.5	0.5	3.5x6x4.5	25	10
16	70~670 (110)	32	42.4	25	20	M3x4	27.4	12	0.5	15	8.5	9.5	0.5	3.5x6x4.5	40	15
20	100~700 (160)	40	50	30	25	M4x6	34.6	15	0.5	20	10	11	0.5	6x9.5x5.5	60	20

Alterations