We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand in Saudi Arabia. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
PSFCJ30-[35-1000/1]
Description
Ends Threaded/Tapped/Stepped/Fully Plated
Stock availability:
On request
Type | D Tol. | Material | Hardness | Surface Treatment | ||||
Solid | One End Tapped | One End Stepped and Tapped | One End Threaded | One End Threaded with O.D. same as Shaft O.D. | ||||
PSFCJ | PSFCT | PSFCG | PSFCN | PSFCQ | g6 | EN 1.3505 Equiv. | Effective Hardened Depth of Induction Hardening >> P.112 58HRC~ | Electroless Nickel Plating |
Part Number | - | L | - | F | - | B | - | P | - | M |
PSFCJ20 | - | 75 | ||||||||
PSFCT20 | - | 525 | - | M8 | ||||||
PSFCG20 | - | 400 | - | F25 | - | P16 | - | M10 | ||
PSFCN20 | - | 950 | - | F50 | - | B30 | - | P10 | ||
PSFCQ12 | - | 500 | - | B20 |
Part Number | 1mm Increment | Selection | (Y)Max. | R | C | |||||||||||||||||||||||||
Type | D | L (Solid / One End Tapped) | L (One End Stepped and Tapped) | F | P | M (One End Tapped) | M (One End Stepped and Tapped) | |||||||||||||||||||||||
Solid Type PSFCJ One End Tapped PSFCT One End Stepped and Tapped PSFCG | 8 | 20~ 800 | 25~798 | 2≤F≤Px4 | 6 | 3 | 4 | 5 | 3 | 800 | 0.3 or Less | 0.5 or Less | ||||||||||||||||||
10 | 20~ 800 | 25~798 | 6~ 8 | 3 | 4 | 5 | 6 | 3 | 4 | 5 | 800 | |||||||||||||||||||
12 | 20~1000 | 25~998 | 6~10 | 4 | 5 | 6 | 8 | 3 | 4 | 5 | 6 | 1000 | ||||||||||||||||||
15 | 25~1000 | 25~998 | 6~13 | 4 | 5 | 6 | 8 | 10 | 3 | 4 | 5 | 6 | 8 | 10 | 1000 | |||||||||||||||
20 | 30~1000 | 25~998 | 6~17 | 4 | 5 | 6 | 8 | 10 | 12 | 4 | 5 | 6 | 8 | 10 | 12 | 1000 | 1.0 or Less | |||||||||||||
25 | 35~1000 | 25~998 | 8~22 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 1000 | ||||||||||||
30 | 35~1000 | 25~998 | 9~27 | 6 | 8 | 10 | 12 | 16 | 20 | 5 | 6 | 8 | 10 | 12 | 16 | 20 | 1000 | |||||||||||||
35 | 35~1000 | 25~998 | 9~32 | 8 | 10 | 12 | 16 | 20 | 24 | 5 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 1000 | 0.5 or Less | |||||||||||
40 | 50~1000 | 25~998 | 11~37 | 10 | 12 | 16 | 20 | 24 | 30 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 30 | 1000 | ||||||||||||
50 | 65~1000 | 25~998 | 11~47 | 12 | 16 | 20 | 24 | 30 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 30 | 1000 |
Part Number | 1mm Increment | P Selection | (Y)Max. | R | C | |||||||||||||
Type | D | L | F | B | ||||||||||||||
One End Threaded PSFCN | 8 | 25~798 | 2≤F≤Px5 | (When P≤6) B≤F-2 (When P=8; 10) B≤F-3 (P≥12) B≤F-5 B≥Pitchx3 | 3 | 4 | 5 | 6 | 800 | 0.3 or Less | 0.5 or Less | |||||||
10 | 25~798 | 4 | 5 | 6 | 8 | 800 | ||||||||||||
12 | 25~998 | 5 | 6 | 8 | 10 | 1000 | ||||||||||||
15 | 25~998 | 5 | 6 | 8 | 10 | 12 | 1000 | 1.0 or Less | ||||||||||
20 | 25~998 | 6 | 8 | 10 | 12 | 16 | 1000 | |||||||||||
25 | 25~998 | 8 | 10 | 12 | 16 | 20 | 24 | 1000 | ||||||||||
30 | 25~998 | 8 | 10 | 12 | 16 | 20 | 24 | 1000 | ||||||||||
35 | 25~998 | 10 | 12 | 16 | 20 | 24 | 30 | 1000 | 0.5 or Less | |||||||||
40 | 25~998 | 12 | 16 | 20 | 24 | 30 | 1000 | |||||||||||
50 | 25~998 | 16 | 20 | 24 | 30 | 1000 |
Coarse Thread Dimension | |
M | Pitch |
3 | 0.5 |
4 | 0.7 |
5 | 0.8 |
6 | 1.0 |
8 | 1.25 |
10 | 1.5 |
12 | 1.75 |
16 | 2.0 |
20 | 2.5 |
24 | 3.0 |
30 | 3.5 |
Part Number | 1mm Increment | M | (Y)Max. | R | C | ||
Type | D | L | B | ||||
One End Threaded with O.D. same as Shaft O.D. PSFCQ | 8 | 25~793 | 7~40 | 8 | 800 | 0.3 or Less | 0.5 or Less |
10 | 25~795 | 8~50 | 10 | 800 | |||
12 | 25~991 | 9~60 | 12 | 1000 | |||
20 | 25~987 | 13~100 | 20 | 1000 | 1.0 or Less | ||
30 | 25~982 | 18~150 | 30 | 1000 |