We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand in Saudi Arabia. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
PSAGS8-[25-795/1]-F[5-18/1]-MMC6-SC[0-787/1]
Description
One End Threaded with Undercut and Wrench Flats/Cross-Drilled Hole
Stock availability:
On request
Type | Material | Hardness | Surface Treatment | ||||
With Wrench Flats | With Cross-Drilled Hole | ||||||
D Tol. g6 | D Tol. h5 | D Tol. f8 | D Tol. g6 | D Tol. f8 | |||
SAFS | SFSU | - | SFHS | - | EN 1.3505 Equiv. | Effective Hardened Depth of Induction Hardening >>P.112 EN 1.3505 Equiv. 58HRC~ EN 1.4125 Equiv. 56HRC~ | - |
SSAFS | SSFSU | - | SSHFS | - | EN 1.4125 Equiv. | ||
PSAFS | PSFSU | - | PSHFS | - | EN 1.3505 Equiv. | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 5µ or More | |
PSSAFS | PSSFSU | - | PSSHFS | - | EN 1.4125 Equiv. | ||
RSAFS | - | - | RSHFS | - | EN 1.3505 Equiv. | LTBC Plating | |
- | - | PSAGS | - | PSHGS | EN 1.1191 Equiv. | - | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 10µ or More |
- | - | PSSAGS | - | - | EN 1.4301 Equiv. |
Part Number | - | L | - | F | - | M | - | SC | - | H |
SAFS13 | - | 800 | - | F23 | - | M10 | ||||
SSHFS20 | - | 450 | - | F28 | - | M12 | - | H15 | ||
Part Number | 1mm Increment | Selection | Wrench Flats Dimensions | D Tol. | (Y)Max. | C | ||||||||||||||
Type | D | L | F | M (Coarse) | SC | W | 1 | g6 | h5 | f8 | ||||||||||
(With Wrench Flats) (D Tolerance g6) SAFS SSAFS PSAFS PSSAFS (D Tolerance f8) PSAGS PSSAGS | (D Tolerance h5) SFSU SSFSU PSFSU PSSFSU | 8 | 25~795 | 5FMx3 F-(g)Pitchx3 | 6 | SC=1mm Increment SC+1L SC0 Details of Wrench Flats >>P.112 | 7 | 8 | -0.005 -0.014 | 0 -0.006 | -0.013 -0.035 | 800 | 0.5 or Less | |||||||
10 | 25~795 | 6 | 8 | 8 | 8 | -0.005 -0.014 | 0 -0.006 | -0.013 -0.035 | 800 | 0.5 or Less | ||||||||||
12 | 25~995 | 6 | 8 | 10 | 10 | 10 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 1000 | 0.5 or Less | |||||||||
13 | 25~995 | 6 | 8 | 10 | 12 | 11 | 10 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 1000 | 0.5 or Less | ||||||||
15 | 25~995 | 6 | 8 | 10 | 12 | 13 | 10 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 1000 | 0.5 or Less | ||||||||
16 | 25~1195 | 6 | 8 | 10 | 12 | 14 | 10 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 1200 | 0.5 or Less | ||||||||
18 | 25~1195 | 6 | 8 | 10 | 12 | 16 | 16 | 10 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 1200 | 0.5 or Less | |||||||
20 | 25~1195 | 6 | 8 | 10 | 12 | 16 | 17 | 10 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 | 1200 | 1.0 or Less | |||||||
25 | 25~1195 | 8 | 10 | 12 | 16 | 20 | 24 | 22 | 10 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 | 1200 | 1.0 or Less | ||||||
30 | 25~1495 | 8 | 10 | 12 | 16 | 20 | 24 | 27 | 15 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 | 1500 | 1.0 or Less | ||||||
35 | 25~1495 | 10 | 12 | 16 | 20 | 24 | 30 | 30 | 15 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 | 1500 | 1.0 or Less | ||||||
40 | 25~1495 | 12 | 16 | 20 | 24 | 30 | 36 | 20 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 | 1500 | 1.0 or Less | |||||||
50 | 25~1495 | 16 | 20 | 24 | 30 | 41 | 20 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 | 1500 | 1.0 or Less |
Part Number | 1mm Increment | Selection | Wrench Flats Dimensions | D Tol. | (Y)Max. | C | ||||||||||
Type | D | L | F | M (Coarse) | SC | W | 1 | g6 | ||||||||
(With Wrench Flats) (D Tolerance g6) LTBC Plating RSAFS | 8 | 25~500 | 5FMx3 F-(g)Pitchx3 | 6 | SC=1mm Increment SC+1L SC0 Details of Wrench Flats >>P.112 | 7 | 8 | -0.005 -0.014 | 800 | 0.5 or Less | ||||||
10 | 25~500 | 6 | 8 | 8 | 8 | -0.005 -0.014 | 800 | 0.5 or Less | ||||||||
12 | 25~500 | 6 | 8 | 10 | 10 | 10 | -0.006 -0.017 | 1000 | 0.5 or Less | |||||||
13 | 25~500 | 6 | 8 | 10 | 12 | 11 | 10 | -0.006 -0.017 | 1000 | 0.5 or Less | ||||||
15 | 25~500 | 6 | 8 | 10 | 12 | 13 | 10 | -0.006 -0.017 | 1000 | 0.5 or Less | ||||||
16 | 25~500 | 6 | 8 | 10 | 12 | 14 | 10 | -0.006 -0.017 | 1200 | 0.5 or Less | ||||||
18 | 25~500 | 6 | 8 | 10 | 12 | 16 | 16 | 10 | -0.006 -0.017 | 1200 | 0.5 or Less | |||||
20 | 25~500 | 6 | 8 | 10 | 12 | 16 | 17 | 10 | -0.007 -0.020 | 1200 | 1.0 or Less | |||||
25 | 25~500 | 8 | 10 | 12 | 16 | 20 | 24 | 22 | 10 | -0.007 -0.020 | 1200 | 1.0 or Less | ||||
30 | 25~500 | 8 | 10 | 12 | 16 | 20 | 24 | 27 | 15 | -0.007 -0.020 | 1500 | 1.0 or Less |
Part Number | 1mm Increment | Selection | Cross-Drilled Hole Dimensions | D Tol. | (Y)Max. | C | ||||||||||
Type | D | L | F | M (Coarse) | H | d | g6 | f8 | ||||||||
(With Cross-Drilled Hole) (D Tolerance g6) SFHS SSHFS PSHFS PSSHFS RSHFS (D Tolerance f8) PSHGS | 8 | 25~500 | 5FMx3 F-(g)Pitchx3 | 6 | H=1mm Increment LH+d/2+2 Hd/2+2 | 3 | -0.005 -0.014 | -0.013 -0.035 | 800 | 0.5 or Less | ||||||
10 | 25~500 | 6 | 8 | 3 | -0.005 -0.014 | -0.013 -0.035 | 800 | 0.5 or Less | ||||||||
12 | 25~500 | 6 | 8 | 10 | 3 | -0.006 -0.017 | -0.016 -0.043 | 1000 | 0.5 or Less | |||||||
13 | 25~500 | 6 | 8 | 10 | 12 | 4 | -0.006 -0.017 | -0.016 -0.043 | 1000 | 0.5 or Less | ||||||
15 | 25~500 | 6 | 8 | 10 | 12 | 4 | -0.006 -0.017 | -0.016 -0.043 | 1000 | 0.5 or Less | ||||||
16 | 25~500 | 6 | 8 | 10 | 12 | 4 | -0.006 -0.017 | -0.016 -0.043 | 1200 | 0.5 or Less | ||||||
18 | 25~500 | 6 | 8 | 10 | 12 | 16 | 6 | -0.006 -0.017 | -0.016 -0.043 | 1200 | 0.5 or Less | |||||
20 | 25~500 | 6 | 8 | 10 | 12 | 16 | 6 | -0.007 -0.020 | -0.020 -0.053 | 1200 | 1.0 or Less | |||||
25 | 25~500 | 8 | 10 | 12 | 16 | 20 | 24 | 7 | -0.007 -0.020 | -0.020 -0.053 | 1200 | 1.0 or Less | ||||
30 | 25~500 | 8 | 10 | 12 | 16 | 20 | 24 | 7 | -0.007 -0.020 | -0.020 -0.053 | 1500 | 1.0 or Less |