MISUMI AIKF100-A50-B[50-75/1]-Y[35-55/1]-G[30-50/1]

Through Hole	Through Holes and Dowel Holes	Material	Surface Treatment
IKDF	IKF	EN-JL 1040 Equiv.	Primer Paint (Gray)
BIKDF	BIKF	Black Oxide
MIKDF	MIKF	Electroless Nickel Plating
AIKDF	AIKF	EN AC-51300 Equiv.	-

EN-JL 1040 Equiv.: Surface treatment is not applied to the machined surfaces and holes. Specifications

Part Number

-

A

-

B

-

X

-

F

-

Y

-

G

IKDF100 BIKDF150 AIKF150

- - -

A50S A70 A100

- -

B60 B60

-

X35

-

F40

- - -

Y40 Y50 Y50

- - -

G40 G100 G70

Through Holes

Part Number	A	Angle Plate Body	Through Hole
W	T	T1	Side A and H	Side A	Side H	Hole Dia.
Type	H	1mm Increment
B	X	F	Y	G	d
IKDF (Primer Paint (Gray)) BIKDF (Black Oxide) MIKDF (Electroless Nickel Plating) AIKDF (Aluminum Casting)	100	*50S	50	15	8	30	35	-	35~55	30~50	9
50	100	14	50~75	11
100	35~55	30~50
150	50	50	15	8	30	35	-	35~105	30~100	9
70	100	14	50~75	40	11
75	75	40~50	35~40
100	100	50~75	35~55	30~50
200	75	75	15	14	40~50	35~40	-	35~155	30~150	11
120	100	50~75	35~75	30~70
250	120	100	18	15	50~75	40~75	30~65	50~205	30~185	11
300	150	18	15	50~75	40~105	30~95	50~255	30~235
350	50~75	50~305	30~285
400	50~75	50~355	30~335

Y+G≤H-15, X+F≤A-15 When A=50 or 70, the ordering code X and F are not required. When A=75, the ordering code F is not required. When A=50, the ordering code B is not required. *Except for A dimension, dimensions of A=50S is smaller than those of A=50. Through Holes and Dowel Holes

Part Number	A	Angle Plate Body	Through Hole	Dowel Hole
W	T	T1	Side A and H	Side A	Side H	Hole Dia.	Side A	Side H	Hole Dia.
Type	H	1mm Increment
B	X	F	Y	G	d	a	h	DH7
IKF (Primer Paint (Gray)) BIKF (Black Oxide) MIKF (Electroless Nickel Plating) AIKF (Aluminum Casting)	100	*50S	50	15	8	30	35	-	35~55	30~50	9	-	Y+(G/2)	6
50	100	14	50~75	11	10
100	35~55	30~50	X+(F/2)
150	50	50	15	8	30	35	-	35~105	30~100	9	-	6
70	100	14	50~75	40	11	55	10
75	75	40~50	35~40
100	100	50~75	35~55	30~50	X+(F/2)
200	75	75	15	14	40~50	35~40	-	35~155	30~150	11	55	10
120	100	50~75	35~75	30~70	X+(F/2)
250	120	100	18	15	50~75	40~75	30~65	50~205	30~185	11	X+(F/2)	10
300	150	18	15	50~75	40~105	30~95	50~255	30~235
350	50~75	50~305	30~285
400	50~75	50~355	30~335

Y+G≤H-15, X+F≤A-15 When A=50 or 70, the ordering code X and F are not required. When A=75, the ordering code F is not required. When A=50, the ordering code B is not required. *Except for A dimension, dimensions of A=50S is smaller than those of A=50. Alterations