We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand in Saudi Arabia. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
HWPG8-P[8-13/0.01]-Q[3-12/0.01]-L[8-16/1]-B[2-20/0.1]-E[1-10/0.1]-F[2-20/0.1]
Description
Double Pilot/Standard/Configurable
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
| Material | Surface Treatment | Hardness | Press Fit | Tapped | |
| D Tolerance m6 | D Tolerance p6 | D Tolerance g6 | |||
| EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | WPM | WPP | WPG |
| EN 1.4301 Equiv. | - | - | SWPM | - | SWPG |
| EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | HWPM | HWPP | HWPG |
| Part Number | - | P | - | Q | - | L | - | B | - | E | - | F |
| SWPM5 HWPG16 | - - | P7.30 P20.02 | - - | Q5.01 Q15.30 | - - | L10 L18 | - - | B10.5 B12.3 | - - | E5.2 E3.1 | - - | F7.8 F5.0 |
| D | m6 | p6 | g6 |
| 2, 3 | +0.008 +0.002 | +0.012 +0.006 | -0.002 -0.008 |
| 4~6 | +0.012 +0.004 | +0.020 +0.012 | -0.004 -0.012 |
| 8, 10 | +0.015 +0.006 | +0.024 +0.015 | -0.005 -0.014 |
| 12, 16 | +0.018 +0.007 | +0.029 +0.018 | -0.006 -0.017 |
| 20 | +0.021 +0.008 | +0.035 +0.022 | -0.007 -0.020 |
| Part Number | P 0.01mm Increment | Q 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | E 0.1mm Increment | F 0.1mm Increment | m | C | Unit Price | |||||
| Type | D | WPM WPP | SWPM | HWPM HWPP | ||||||||||
| D Tolerance m6 WPM SWPM HWPM | D Tolerance p6 WPP HWPP | 2 | 2.00~4.00 | 1.00~3.00 | 2~6 | 2.0~6.0 | 1.0~3.0 | 2.0~6.0 | 1 | 0.3 | 0 | |||
| 3 | 3.00~6.00 | 1.00~5.00 | 3~6 | 2.0~10.0 | 1.0~5.0 | 2.0~10.0 | 2 | 0.5 | 1 | |||||
| 4 | 4.00~7.00 | 2.00~6.00 | 4~8 | 2.0~15.0 | 1.0~8.0 | 2.0~15.0 | 3 | 1 | ||||||
| 5 | 5.00~8.00 | 2.00~7.00 | 5~10 | 2.0~20.0 | 1.0~10.0 | 2.0~20.0 | ||||||||
| 6 | 6.00~10.00 | 2.00~9.00 | 6~12 | |||||||||||
| 8 | 8.00~13.00 | 3.00~12.00 | 8~16 | 4 | 1.5 | 2 | ||||||||
| 10 | 10.00~15.00 | 3.00~14.00 | 10~20 | 3.0~20.0 | 3.0~20.0 | 2 | ||||||||
| 12 | 12.00~16.00 | 5.00~15.00 | 12~24 | |||||||||||
| 16 | 16.00~25.00 | 10.00~24.00 | 16~32 | 5.0~20.0 | 5.0~20.0 | 5 | 3 | |||||||
| 20 | 20.00~30.00 | 13.00~29.00 | 20~40 |
| Part Number | P 0.01mm Increment | Q 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | E 0.1mm Increment | F 0.1mm Increment | m | M (Coarse) | * Tightening Torque N cm | Unit Price | ||||
| Type | D | WPG | SWPG | HWPG | ||||||||||
| D Tolerance g6 WPG SWPG HWPG | 6 | 6.00~10.00 | 2.00~9.00 | 6~12 | 2.0~20.0 | 1.0~10.0 | 2.0~20.0 | 3 | M3 | 147 | 5 | |||
| 8 | 8.00~13.00 | 3.00~12.00 | 8~16 | 4 | M4 | 333 | 8 | |||||||
| 10 | 10.00~15.00 | 3.00~14.00 | 10~20 | 3.0~20.0 | 3.0~20.0 | M5 | 676 | |||||||
| 12 | 12.00~16.00 | 5.00~15.00 | 12~24 | |||||||||||
| 16 | 16.00~25.00 | 10.00~24.00 | 16~32 | 5.0~20.0 | 5.0~20.0 | 5 | M8 | 2803 | 12 | |||||
| 20 | 20.00~30.00 | 13.00~29.00 | 20~40 |
