MISUMI FPYN8-P[12-15/0.01]-L[5-10/1]-B[3-15/0.1]

Material No.	Material	Surface Treatment	Hardness	Type
Press Fit	Tapped	Threaded
	EN 1.7242 Equiv.	-	Carburized 55HRC~ (Depth: 0.7 ~ 0.8)	FPYT	FPYTM	FPYN
	EN 1.4301 Equiv.	-	-	SFPYT	SFPYTM	SFPYN

Specifications

Part Number	-	P	-	L	-	B
FPYT10	-	P15.00	-	L15	-	B10.0

Press Fit

Part Number	P 0.01mm Increment	L 1mm Increment	B 0.1mm Increment	C	Unit Price
Type	D	D dim. Tolerance m6	EN 1.7242 Equiv. Carburized FPYT	EN 1.4301 Equiv. SFPYT
FPYT SFPYT	6	+0.012 +0.004	10.00~13.00	6~12	2.0~15.0	1
8	+0.015 +0.006	12.00~15.00	8~16	3.0~20.0	1.5
10	14.00~16.00	10~20	3.0~30.0	2
12	+0.018 +0.007	16.00~18.00	12~24	5.0~30.0
13	17.00~20.00	13~26	5.0~30.0
16	20.00~25.00	16~32	5.0~35.0	3
20	+0.021 +0.008	24.00~30.00	20~40	5.0~40.0

Tapped

Part Number	P 0.01mm Increment	L 1mm Increment	B 0.1mm Increment	M (Coarse)	* Tightening Torque N cm		Unit Price
Type	D	D dim. Tolerance g6	EN 1.7242 Equiv. Carburized FPYTM	EN 1.4301 Equiv. SFPYTM
FPYTM SFPYTM	6	-0.004 -0.012	10.00~13.00	9~12	2.0~15.0	M2.6	-	4
8	-0.005 -0.014	12.00~15.00	12~16	3.0~20.0	M4	333	6
10	14.00~16.00	12~20	3.0~30.0	M5	676	8
12	-0.006 -0.017	16.00~18.00	12~24	5.0~30.0
13	17.00~20.00	16~26	5.0~30.0	M8	2803	12
16	20.00~25.00	16~32	5.0~35.0
20	-0.007 -0.020	24.00~30.00	20~40	5.0~40.0

Note the strength of under-head part.>>P.1566 * Tightening torque (reference) will be within Strength Class of Tightening Torque on Technical Data >>P. 2297 (10.9). Not applicable when using locking materials or lock washers. Threaded

Part Number	P 0.01mm Increment	L 1mm Increment	B 0.1mm Increment	M (Coarse)	* Tightening Torque N cm	Unit Price
Type	D	D dim. Tolerance g6	EN 1.7242 Equiv. Carburized FPYN	EN 1.4301 Equiv. SFPYN
FPYN SFPYN	6	-0.004 -0.012	10.00~13.00	3~10	2.0~15.0	M6	1156
8	-0.005 -0.014	12.00~15.00	5~10	3.0~15.0	M8	2803
10	14.00~16.00	5~15	3.0~20.0	M10	5557
12	-0.006 -0.017	16.00~18.00	8~15	5.0~20.0	M12	9702
16	20.00~25.00	8~20	5.0~20.0	M16	24108
20	-0.007 -0.020	24.00~30.00	10~20	5.0~20.0	M20	46942

* Tightening torque (reference) will be within Strength Class of Tightening Torque on Technical Data >>P. 2297 (10.9). Not applicable when using locking materials or lock washers.