MISUMI BFPFNA10-P[11-15/0.01]-L[5-15/1]-B[6-20/0.1]

Material No.	Material	Surface Treatment	Hardness	Type
P Selectable	P Configurable	P, L, B Configurable	P, L, B, ML Configurable
	EN 1.2510 Equiv.	-	Treated Hardness: 60 ~ 63HRC	JPFNB	JPFNA	FPFNA	FPFNLA
	EN 1.2510 Equiv.	Hard Chrome Plating Plating Thickness: 3µm or more	Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~	-	GJPFNA	GFPFNA	GFPFNLA
	EN 1.2510 Equiv.	-	-	-	BJPFNA	BFPFNA	-
	EN 1.4301 Equiv.*	-	-	SJPFNB	SJPFNA	SFPFNA	SFPFNLA
	EN 1.4125 Equiv.	-	Treated Hardness: 50 ~ 55HRC	CJPFNB	-	CFPFNA	CFPFNLA

* For P Selectable Type, it is EN 1.4301 Equiv. equivalent. Specifications

Part Number	-	P	-	L	-	B	-	ML
JPFNA3 FPFNA5 FPFNLA8	- - -	5.20 P7.80 P10.00	- -	L8 L5	- -	B4.0 B5.0	-	ML8

P Dim. Tolerance Table

P	h6
3.50~6.00	0 -0.008
6.01~10.00	0 -0.009
10.01~18.00	0 -0.011
18.01~30.00	0 -0.013

P Selectable

Part Number	P Selection	L	B	C	M (Coarse)	* Tightening Torque Ncm	ML
Type	D	D dim. Tolerance g6
JPFNB SJPFNB CJPFNB	3	-0.002 -0.008	4	5	6						2	3	0.5	M3	147	4.5
4	-0.004 -0.012		5	6	8					4	1	M4	333	6
5			6	8	9				3	M5	676	7.5
6				8	9	10			5	M6	1156	9
8	-0.005 -0.014					9	10	12	13	5	6	1.5	M8	2803	12

P Configurable

Part Number	P 0.01mm Increment	L	B	C	M (Coarse)	* Tightening Torque Ncm	ML
Type	D	D dim. Tolerance g6
JPFNA GJPFNA BJPFNA SJPFNA	3	-0.002 -0.008	3.50~6.00	2	3	0.5	M3	147	4.5
4	-0.004 -0.012	4.50~7.00	4	1	M4	333	6
5	5.50~8.00	3	M5	676	7.5
6	6.50~10.00	5	M6	1156	9
8	-0.005 -0.014	9.00~13.00	5	6	1.5	M8	2803	12
10	11.00~15.00	10	2	M10	5557	15
12	-0.006 -0.017	13.00~16.00	8	20	M12	9702	18
16	17.00~25.00	25	3	M16	24108	24
20	-0.007 -0.020	22.00~30.00	10	30	M20	46942	30

P, L, B Configurable

Part Number	P 0.01mm Increment	L 1mm Increment	B 0.1mm Increment	C	M (Coarse)	* Tightening Torque Ncm	ML
Type	D	D dim. Tolerance g6
FPFNA GFPFNA BFPFNA SFPFNA CFPFNA	3	-0.002 -0.008	3.50~6.00	2~6	3.0~10.0	0.5	M3	147	4.5
4	-0.004 -0.012	4.50~7.00	2~8	4.0~10.0	1	M4	333	6
5	5.50~8.00	3~10	4.0~10.0	M5	676	7.5
6	6.50~10.00	3~10	4.0~12.0	M6	1156	9
8	-0.005 -0.014	9.00~13.00	5~10	5.0~15.0	1.5	M8	2803	12
10	11.00~15.00	5~15	6.0~20.0	2	M10	5557	15
12	-0.006 -0.017	13.00~16.00	8~15	6.0~20.0	M12	9702	18
16	17.00~25.00	8~20	7.0~20.0	3	M16	24108	24
20	-0.007 -0.020	22.00~30.00	10~20	10.0~20.0	M20	46942	30

P, L, B, ML Configurable Thread length (ML) is configurable between Mx1 ~ Mx3 (max.).

Part Number	P 0.01mm Increment	L 1mm Increment	B 0.1mm Increment	ML 1mm Increment	C	M (Coarse)	* Tightening Torque Ncm
Type	D	D dim. Tolerance g6
FPFNLA GFPFNLA SFPFNLA CFPFNLA	3	-0.002 -0.008	3.50~6.00	2~6	3.0~10.0	3~9	0.5	M3	147
4	-0.004 -0.012	4.50~7.00	2~8	4.0~10.0	4~12	1	M4	333
5	5.50~8.00	3~10	4.0~10.0	5~15	M5	676
6	6.50~10.00	3~10	4.0~12.0	6~18	M6	1156
8	-0.005 -0.014	9.00~13.00	5~10	5.0~15.0	8~24	1.5	M8	2803
10	11.00~15.00	5~15	6.0~20.0	10~30	2	M10	5557
12	-0.006 -0.017	13.00~16.00	8~15	6.0~20.0	12~30	M12	9702
16	17.00~25.00	8~20	7.0~20.0	16~40	3	M16	24108
20	-0.007 -0.020	22.00~30.00	10~20	10.0~20.0	20~40	M20	46942

*Tightening torque (reference) will be within Strength Class of Tightening Torque on Technical Data >>P. 2297 (10.9). Not applicable when using locking materials or lock washers. Alterations