MISUMI GFPDTC12-P[13-16/0.01]-L[12-24/1]-B[3-30/0.1]

Material No.	Material	Surface Treatment	Hardness	Type
P Selectable	P Configurable	P, L, B Configurable
	EN 1.2510 Equiv.	-	Treated Hardness: 60 ~ 63HRC	JPDTA	JPDTC	FPDTC
	EN 1.2510 Equiv.	Hard Chrome Plating Plating Thickness: 3µm or more	Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~	GJPDTA	GJPDTC	GFPDTC
	EN 1.2510 Equiv.	-	-	-	-	BFPDTC
	EN 1.4301 Equiv.*	-	-	SJPDTA	-	SFPDTC
	EN 1.4125 Equiv.	-	Treated Hardness: 50 ~ 55HRC	CJPDTA	-	-

* For P Selectable Type, it is EN 1.4301 Equiv. equivalent. Specifications

Part Number	-	P	-	L	-	B
JPDTA10 JPDTC10 FPDTC12T	- - -	14 14.25 P14.25	-	L18	-	B8.6

P Dim. Tolerance Table

P	h6
5.50~6.00	0 -0.008
6.01~10.00	0 -0.009
10.01~18.00	0 -0.011
18.01~30.00	0 -0.013

P Selectable

Part Number	P Selection	L	B	M (Coarse)	* Tightening Torque N•cm		C
Type	D	D dim. Tolerance g6
JPDTA GJPDTA SJPDTA CJPDTA	6	-0.004 -0.012	8, 10	10	5	M3	147	5	1
8	-0.005 -0.014	12	12	6	M5	676	8	1.5
10	12, 14	16	10	2
12	-0.006 -0.017	16	20	20
13	18	22	22	M8	2803	12	3
16	25	24	25
20	-0.007 -0.020	30	32	30

P Configurable

Part Number	P 0.01mm Increment	L	B	M (Coarse)	* Tightening Torque N•cm		C
Type	D	D dim. Tolerance g6
JPDTC GJPDTC	5	-0.004 -0.012	5.50~8.00	8	4	M2	-	3	1
6	6.50~10.00	10	5	M3	147	5
6T	M2.6	-	4
8	-0.005 -0.014	9.00~13.00	12	6	M5	676	8	1.5
8T	M4	333	6
10	11.00~15.00	16	10	M5	676	8	2
12	-0.006 -0.017	13.00~16.00	20	20
13	14.00~18.00	22	22	M8	2803	12	3
16	17.00~25.00	24	25
20	-0.007 -0.020	22.00~30.00	32	30

P, L, B Configurable

Part Number	P 0.01mm Increment	L 1mm Increment	B 0.1mm Increment	M (Coarse)	* Tightening Torque N•cm		C
Type	D	D dim. Tolerance g6
FPDTC GFPDTC BFPDTC SFPDTC	5	-0.004 -0.012	5.50~8.00	5~10	2.0~10.0	M2	-	3	1
6	6.50~10.00	6~12	2.0~12.0	M3	147	5
6T	M2.6	-	4
8	-0.005 -0.014	9.00~13.00	8~16	2.0~15.0	M5	676	8	1.5
8T	6~16	M4	333	6
10	11.00~15.00	10~20	3.0~20.0	M5	676	8	2
10T	6~16	M4	333	6
12	-0.006 -0.017	13.00~16.00	12~24	3.0~30.0	M5	676	8
12T	8~18	M4	333	6
13	14.00~18.00	13~26	5.0~30.0	M8	2803	12	3
13T	8~20	M6	1156	9
16	17.00~25.00	16~32	5.0~35.0	M8	2803	12
16T	10~24	M6	1156	9
20	-0.007 -0.020	22.00~30.00	20~40	5.0~40.0	M8	2803	12
20T	12~30	M6	1156	9

Pins of D dimension with T have one size smaller thread diameter and larger wall thickness. (Actual D dimension is the number without "T".) Note the strength of under-head part. >> P.1566 Please confirm pilot hole depth on >> P.1566. Holes may go through. * Tightening torque (reference) will be within Strength Class of Tightening Torque on Technical Data >> P. 2297 (10.9). Not applicable when using locking materials or lock washers. Alterations