MISUMI JPUD16-[13-16/0.01]

Material No.	Material	Surface Treatment	Hardness	P Selectable	P Configurable	P, L, B Configurable
Type	Shape	Type	Shape	Type	Shape
	EN 1.2510 Equiv.	-	Treated Hardness: 60 ~ 63HRC	JP	UB (Round) DU (Diamond)	JP	UA (Round) UD (Diamond)	FP	UA (Round) UD (Diamond)
	EN 1.2510 Equiv.	Hard Chrome Plating Plating Thickness: 3µm or more	Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~	-	-	GFP
	EN 1.4301 Equiv.	-	-	SJP	-	SFP

Specifications

Part Number	-	P	-	L	-	B
JPUB8	-	6
JPUA6	-	4.02
FPUA6	-	P4.01	-	L8	-	B3.5

D	Tolerance g6	m	H	(W)	L	M (Coarse)	Tightening Torque N cm
5	-0.004 -0.012	2	8	1.5	3	M2	-
6	1.8	5	M3	147
6T	4	M2.6	-
8	-0.005 -0.014	3	11	2.2	8	M5	676
8T	6	M4	333
10	13	3	8	M5	676
10T	6	M4	333
12	-0.006 -0.017	15	3.2	8	M5	676
12T	6	M4	333
13	4	16	3.5	10	M8	2803
13T	9	M6	1156
16	19	4	12	M8	2803
16T	9	M6	1156
20	-0.007 -0.020	5	23	5.5	12	M8	2803
20T	9	M6	1156

*Tightening torque (reference) will be within Strength Class of Tightening Torque on Technical Data >>P. 2297 (10.9). Not applicable when using locking materials or lock washers. P Selectable

Part Number	P Selection	L	B	Unit Price Round Shape	Unit Price Diamond Shape
Type	Shape	D	EN 1.2510 Equiv. Hardened JPUB	EN 1.4301 Equiv. SJPUB	EN 1.2510 Equiv. Hardened JPDU	EN 1.4301 Equiv. SJPDU
JP SJP	UB (Round) DU (Diamond)	5	3 4 5 6	10	5				-
6	4 5 6
6T
8	5 6 8	15	6
8T
10	8 10	8
12	8 10 12
13	8 10 12 13	22
16	13 14 15 16	10
20	16 20	30

P Configurable

Part Number	P 0.01mm Increment	L	B	Unit Price Round Shape	Unit Price Diamond Shape
Type	Shape	D	EN 1.2510 Equiv. Hardened JPUA	EN 1.2510 Equiv. Hardened JPUD
JP	UA (Round) UD (Diamond)	5	3.00~6.00	10	5
6	4.00~7.00
6T
8	5.00~9.00	15	6
8T
10	7.00~11.00	8
12	7.00~12.00
13	8.00~13.00	22
16	13.00~16.00	10
20	16.00~20.00	30

P, L, B Configurable

Part Number	P 0.01mm Increment	L 1mm Increment	B 0.1mm Increment	Unit Price Round Shape	Unit Price Diamond Shape
Type	Shape	D	EN 1.2510 Equiv. Hardened FPUA	Hard EN 1.2510 Equiv. GFPUA	EN 1.4301 Equiv. SFPUA	EN 1.2510 Equiv. Hardened FPUD	Hard EN 1.2510 Equiv. GFPUD	EN 1.4301 Equiv. SFPUD
FP GFP SFP	UA (Round) UD (Diamond)	5	3.00~6.00	5~10	2.0~10.0
6	4.00~7.00	6(9)~12
6T
8	5.00~9.00	8(12)~16	2.0~12.0
8T
10	7.00~11.00	10(12)~20	2.0~15.0
10T	8(12)~16
12	7.00~12.00	12~24	3.0~20.0
12T	8(12)~18
13	8.00~13.00	13(14)~26	3.0~20.0
13T	10(14)~20
16	13.00~16.00	16~32	5.0~20.0
16T	10(14)~24
20	16.00~20.00	20~40	5.0~20.0
20T	12(18)~30

Pins of D dimension with T have one size smaller thread diameter and larger wall thickness. (Actual D dimension is the number without "T".) L dimension in ( ) is applicable to Diamond Shape. Notes on the strength of under-head part.>>P.1566 Please confirm pilot hole depth on >>P.1566. Holes may go through. Alterations