MISUMI CJPQTA10-[11-15/0.01]

Material No.	Material	Surface Treatment	Hardness	P Selectable	P Configurable	P, L, B Configurable
Type	Shape Code	Type	Shape Code	Type	Shape Code
	EN 1.2510 Equiv.	-	Treated Hardness: 60 ~ 63HRC	JPQT	BB (Round)	JPQT	A (Round) D (Diamond)	FPQT	A (Round) D (Diamond)
	EN 1.2510 Equiv.	Hard Chrome Plating	Treated Hardness: 50 ~ 55HRC	-	GJPQT	GFPQT
	EN 1.4301 Equiv.*	-	-	SJPQT	SJPQT	SFPQT
	EN 1.4301 Equiv.	Hard Chrome Plating	-	-	-	HFPQT
	EN 1.4125 Equiv.	-	Treated Hardness: 50 ~ 55HRC	CJPQT	CJPQT	CFPQT
	EN 1.2510 Equiv.	Buffing	Treated Hardness: 60 ~ 63HRC	-	MJPQT	MFPQT
	EN 1.2510 Equiv.	Hard Chrome Plating + Buffed	Treated Hardness: 50 ~ 55HRC	-	-	MGFPQT
	EN 1.4125 Equiv.	Buffing	Treated Hardness: 50 ~ 55HRC	-	MCJPQT	MCFPQT

*For P Selectable Type, it is EN 1.4301 Equiv. equivalent. Hard Chrome Plating: Plating Thickness 3µm or more, Plating Hardness 750HV ~ Specifications

Part Number	-	P	-	L	-	B
JPQTA6 MFPQTA6	- -	10.0 P10.00	-	L10	-	B5.0

P Selectable

Part Number	P Selection	L	B	M (Coarse)	* Tightening Torque N cm
Type	Shape	D	D dim. Tolerance g6
JPQT SJPQT CJPQT	BB (Round)	6	-0.004 -0.012	7	8	9	10											10	8	M3	147	5
8	-0.005 -0.014			9	10	11	12	13								15	M5	676	8
10					11	12	13	15							10
12	-0.006 -0.017								15	16
16										18	19	20	24	25	22	M8	2803	12

P Configurable

Part Number	P 0.01mm Increment	L	B	M (Coarse)	* Tightening Torque Ncm		(W)
Type	Shape	D	D dim. Tolerance g6
JPQT GJPQT SJPQT CJPQT (Buff Finished) MJPQT MCJPQT	A (Round) D (Diamond)	5	-0.004 -0.012	5.50~8.00	10	6	M2	-	3	2.2
6	6.50~10.00	8	M3	147	5	3
6T	M2.6	-	4
8	-0.005 -0.014	9.00~13.00	15	M5	676	8	3.5
8T	M4	333	6
10	11.00~15.00	10	M5	676	8	4
12	-0.006 -0.017	13.00~16.00	5
13	14.00~18.00	22	M8	2803	10	5.5
16	17.00~25.00	12	7
20	-0.007 -0.020	22.00~30.00	30	15	9

P, L, B Configurable

Part Number	P 0.01mm Increment	L 1mm Increment	B 0.1mm Increment	M (Coarse)	* Tightening Torque Ncm		(W)
Type	Shape	D	D dim. Tolerance g6
FPQT GFPQT SFPQT HFPQT CFPQT (Buff Finished) MFPQT MGFPQT MCFPQT	A (Round) D (Diamond)	5	-0.004 -0.012	5.50~8.00	5(9)~10	2.0~10.0	M2	-	3	2.2
6	6.50~10.00	6(9)~12	2.0~12.0	M3	147	5	3
6T	M2.6	-	4
8	-0.005 -0.014	9.00~13.00	8(12)~16	2.0~15.0	M5	676	8	3.5
8T	6(12)~16	M4	333	6
10	11.00~15.00	10(12)~20	3.0~20.0	M5	676	8	4
10T	6(12)~16	M4	333	6
12	-0.006 -0.017	13.00~16.00	12~24	3.0~20.0	M5	676	8	5
12T	8(12)~18	M4	333	6
13	14.00~18.00	13(14)~26	5.0~20.0	M8	2803	10	5.5
13T	8(14)~20	M6	1156	9
16	17.00~25.00	16~32	5.0~20.0	M8	2803	12	7
16T	10(14)~24	M6	1156	9
20	-0.007 -0.020	22.00~30.00	20~40	5.0~20.0	M8	2803	12	9
20T	12(18)~30	M6	1156	9

Please confirm pilot hole depth on >>P.1566. Holes may go through. Pins of D dimension with T have one size smaller thread diameter and larger wall thickness. (Actual D dimension is the number without "T".) L dimension in ( ) is applicable to Diamond Shape. Note the strength of under-head part.>>P.1566 * Tightening torque (reference) will be within Strength Class of Tightening Torque on Technical Data >>P.2297 (10.9). Not applicable when using locking materials or lock washers. Alterations