MISUMI FPQSTD12-P[7-12/0.01]-L[12-24/1]-B[3-20/0.1]

Material No.	Material	Surface Treatment	Hardness	P Selectable	P Configurable	P, L, B Configurable
Type	Shape Code	Type	Shape Code	Type	Shape Code
	EN 1.2510 Equiv.	-	Treated Hardness: 60 ~ 63HRC	JPQS	TB (Round)	JPQS	TA (Round) TD (Diamond)	FPQS	TA (Round) TD (Diamond)
	EN 1.2510 Equiv.	Hard Chrome Plating Plating Thickness: 3µm or more	Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~	-	GJPQS	GFPQS
	EN 1.4301 Equiv.*	-	-	-	SJPQS	SFPQS
	EN 1.4125 Equiv.	-	Treated Hardness: 50 ~ 55HRC	-	CJPQS	CFPQS

* For P Selectable Type, it is EN 1.4301 Equiv. equivalent. Specifications

Part Number	-	P	-	L	-	B
JPQSTA6	-	4.00
FPQSTA6	-	P4.00	-	L10	-	B5.5

P Selectable

Part Number	P Selection	L	B	M (Coarse)	* Tightening Torque Ncm
Type	Shape	D	D dim. Tolerance g6
JPQS	TB (Round)	6	-0.004 -0.012	4	5					10	5	M3	147	5
8	-0.005 -0.014			6	7			15	6	M5	676	8
10	-0.006 -0.017				7	8		8
13					8	10	22	M8	2803	12
16						10	10

P Configurable

Part Number	P 0.01mm Increment	L	B	M (Coarse)	* Tightening Torque Ncm		(W)
Type	Shape	D	D dim. Tolerance g6
JPQS GJPQS SJPQS CJPQS	TA (Round) TD (Diamond)	5	-0.004 -0.012	3.00~5.00	10	5	M2	-	3	1.2
6	4.00~6.00	M3	147	5	1.5
6T	M2.6	-	4
8	-0.005 -0.014	6.00~8.00	15	6	M5	676	8	1.8
8T	M4	333	6
10	-0.006 -0.017	7.00~10.00	8	M5	676	8	2.2
12	7.00~12.00	2.5
13	8.00~13.00	22	M8	2803	12	3
16	10.00~16.00	10	4
20	-0.007 -0.020	13.00~20.00	30	5

P, L, B Configurable

Part Number	P 0.01mm Increment	L 1mm Increment	B 0.1mm Increment	M (Coarse)	* Tightening Torque Ncm		(W)
Type	Shape	D	D dim. Tolerance g6
FPQS GFPQS SFPQS CFPQS	TA (Round) TD (Diamond)	5	-0.004 -0.012	3.00~5.00	8~10	2.0~10.0	M2	-	3	1.2
6	4.00~6.00	8(9)~12	2.0~12.0	M3	147	5	1.5
6T	M2.6	-	4
8	-0.005 -0.014	6.00~8.00	11(12)~16	2.0~15.0	M5	676	8	1.8
8T	M4	333	6
10	7.00~10.00	11(12)~20	3.0~20.0	M5	676	8	2.2
10T	8(12)~16	M4	333	6
12	-0.006 -0.017	7.00~12.00	12~24	M5	676	8	2.5
12T	8(12)~18	M4	333	6
13	8.00~13.00	13(14)~26	5.0~20.0	M8	2803	10	3
13T	10(14)~20	M6	1156	9
16	10.00~16.00	16~32	M8	2803	12	4
16T	10(14)~24	M6	1156	9
20	-0.007 -0.020	13.00~20.00	20~40	M8	2803	12	5
20T	12(18)~30	M6	1156	9

Pins of D dimension with T have one size smaller thread diameter and larger wall thickness. (Actual D dimension is the number without "T".) L dimension in ( ) is applicable to Diamond Shape. Note the strength of under-head part.>>P.1566Please confirm pilot hole depth on >>P.1566. Holes may go through. * Tightening torque (reference) will be within Strength Class of Tightening Torque on Technical Data >>P. 2297 (10.9). Not applicable when using locking materials or lock washers. Alterations