MISUMI BPAT10-50-50

A, B Selectable	A, B Configurable	Material	Hardness
BPAT	BPATF	Non-Contaminating Chloroprene Rubber	Shore A70
BPAS	BPASF	Shore A50
BPTG	-	Natural Rubber	Shore A50

Color may come off a little depending on circumstances. Features of Non-Contaminating Chloroprene Rubber General rubbers may contaminate the contact materials with their cross-linker or oil. Non-Contaminating chloroprene rubber is uniquely compounded so that it minimizes such damages. The general properties are the same as those of ordinary chloroprene rubber. Specifications A, B Selectable

Part Number	-	A	-	B
BPAT10	-	50	-	150

A, B Configurable

Part Number	-	A	-	B	-	F	-	G	-	N
BPATF10 BPASF4H10	- -	150 200	- -	100 125	-	F30	-	G20	-	N6

A, B Selectable

Part Number	A Selection	B Selection	Applicable Load N {kgf}	Deflection Characteristic N/mm {kgf/mm}	Unit Price
Type	T	BPAT	BPAS, BPTG	BPAT	BPAS, BPTG	BPAT	BPAS	BPTG
BPAT BPAS BPTG	10	50	50	613~1275 {63~130}	355~613 {36~63}	1095 {112}	488 {50}
150	1839~3825 {188~390}	1066~1839 {109~188}	3284 {335}	1465 {149}
300	3677~7649 {375~780}	2133~3677 {218~375}	6567 {670}	2930 {299}
100	100	2452~5099 {250~520}	1422~2452 {145~250}	4378 {446}	1953 {199}
200	4903~10199 {500~1040}	2844~4903 {290~500}	8756 {893}	3906 {398}
300	7355~15298 {750~1560}	4266~7355 {435~750}	13134 {1339}	5859 {597}			-
150	150	5516~11474 {563~1170}	3199~5516 {326~563}	9851 {1004}	4394 {448}
200	200	9807~20398 {1000~2080}	5688~9807 {580~1000}	17512 {1786}	7812 {797}
300	300	22065~45895 {2250~4680}	12798~22065 {1305~2250}	39402 {4018}	17577 {1792}
20	50	50	529~1872 {54~191}	294~882 {30~90}	451 {46}	196 {20}			-
150	1588~5615 {162~573}	882~2646 {90~270}	1352 {138}	588 {60}			-
300	3175~11231 {324~1146}	1764~5292 {180~540}	2705 {276}	1176 {120}			-
100	100	2117~7487 {216~764}	1176~3528 {120~360}	1803 {184}	784 {80}			-
200	4234~14974 {432~1528}	2352~7056 {240~720}	3606 {368}	1568 {160}			-
300	6350~22462 {648~2292}	3528~10584 {360~1080}	5410 {552}	2352 {240}			-
150	150	4763~16846 {486~1719}	2646~7938 {270~810}	4057 {414}	1764 {180}			-
200	200	8467~29949 {864~3056}	4704~14112 {480~1440}	7213 {736}	3136 {320}			-
300	300	19051~67385 {1944~6876}	10584~31752 {1080~3240}	16229 {1656}	7056 {720}			-

It can be cut with a utility knife at 25mm increments. Do not overlap 2 pieces or more. kgf=Nx0.101972 A, B Configurable - Standard Type - Standard Type - Hole Type

Part Number	25mm Increment (AB)
Type	T	A	B
BPATF BPASF	10	25~400	25~300
20

Part Number	25mm Increment (AB)	1mm Increment	Hole Dia. 1mm Increment
Type	Nominal	T	A	B	F	G	N
BPATF BPASF	1H 2H 4H	10	25~400	25~300	5~395	5~295	5~20
20

F Specification Range: For 1H, N/2+2.5FA-N/2-2.5; for 2H and 4H, N+5FA-N-5. G Specification Range: For 1H and 2H, N/2+2.5GB-N/2-2.5; for 4H, N+5GB-N-5. The price of Hole Type is found by adding the Standard Type Unit Price to the Hole Machining Charge.

Type	T	Allowable Load N {kgf}/cm2	Deflection Characteristic N/mm {kgf/mm}/cm2
BPATF	10	50 {5.2}	44	{4.5}
20	75 {7.6}	17.6	{1.8}
BPASF	10	24 {2.5}	20	{2.0}
20	35 {3.6}	7.8	{0.8}

Alterations