We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand in Saudi Arabia. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
PKCA6FNQ-[10-300/0.1]-[10-200/0.1]-[5-19/0.1]
Description
PEEK Plates
Stock availability:
On request
Type | Grade | Color | Operating Ambient Temperature |
PKA | Standard | Ash Brown | -50~250C |
PKAH | Sliding | Black | |
PKCA | Electrical Conductivity | Black | Ambient Temperature ~ 250C |
Part Number | - | A | - | B | - | T | |
• Circular Sawing • Guaranteed Perpendicularity of Circular Saw Cuts • 4-side Milling • 6-surface Milling • Upper-lower Surface Milling | PKA PKANTQ PKA4FN PKA6FMN PKA2FQ | - - - - - | 300 200.5 150.5 100.3 80 | - - - - - | 200 100.5 100.3 90.5 50 | - - - - - | 5 10 16 10.5 5 |
Part Number | Dimension Range by Material | A | B | T | |||||
Type | Finish Selection | T Dimension Tolerance | A, B Dimension Tolerance | ||||||
PKA PKAH PKCA | (Standard) (Sliding) (Conductive Grade) | Circular Sawing | 1mm Increment | Selectable | |||||
- | Not available | Not available | PKA | 20~300 | 20~200 | 5, 8, 10 | |||
20~250 | 20~150 | 16, 20, 25 | |||||||
PKAH | 20~300 | 20~200 | 5, 8, 10 | ||||||
PKCA | 10 | ||||||||
20~250 | 20~150 | 16, 20 | |||||||
Guaranteed Perpendicularity of Circular Saw Cuts (NT) | 0.1mm Increment | Selectable | |||||||
NT | Not available | Q N M | T5, 8, 10 0~+0.3 0.2 -0.3~0 | T16, 20 0~+0.4 0.3 -0.4~0 | T25 0~+0.5 0.4 -0.5~0 | PKA | 20~300 | 20~200 | 5, 8, 10 |
20~250 | 20~150 | 16, 20, 25 | |||||||
PKAH | 20~300 | 20~200 | 5, 8, 10 | ||||||
PKCA | 10 | ||||||||
20~250 | 20~150 | 16, 20 | |||||||
4-side Milling (4F) | 0.1mm Increment | Selectable | |||||||
4F | Not available | Q 0~+0.2 N 0.1 M -0.2~0 | PKA | 10~300 | 10~200 | 5, 8, 10 | |||
10~250 | 10~150 | 16, 20, 25 | |||||||
PKAH | 10~300 | 10~200 | 5, 8, 10 | ||||||
PKCA | 10 | ||||||||
10~250 | 10~150 | 16, 20 | |||||||
6-surface Milling (6F) | 0.1mm Increment | 0.1mm Increment | |||||||
6F | Q 0~+0.2 N 0.1 M -0.2~0 | Q 0~+0.2 N 0.1 M -0.2~0 | PKA | 10~300 | 10~200 | 5~9 | |||
10~250 | 10~150 | 9.1~24 | |||||||
PKAH | 10~300 | 10~200 | 5~9 | ||||||
PKCA | |||||||||
10~300 | 10~200 | 9.1~10 | |||||||
10~250 | 10~150 | 10.1~19 | |||||||
Upper-lower Surface Milling (2F) | 1mm Increment | 0.1mm Increment | |||||||
2F | Q 0~+0.2 N 0.1 M -0.2~0 | Not available | PKA | 20~250 | 20~150 | 5~24 | |||
PKAH | 5~9 | ||||||||
PKCA | 9.1~19 |