We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand in Saudi Arabia. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SWSM-HN-D[9-20/0.5]-V[3-58/0.5]-T[1-10/0.1]
Description
Metal Washers/Thickness +-0.10 & +-0.01 mm/ID(H7) & OD(g6/h7) Selectable
Stock availability:
On request
Part Number | Material | Surface Treatment | |
Standard Grade | Precision Grade | ||
SWSC | SWMC | EN 1.1191 Equiv. | - |
SWSB | SWMB | Black Oxide | |
SWSM | SWMM | Electroless Nickel Plating | |
SWSS | SWMS | EN 1.4301 Equiv. | - |
Part Number | - | Tolerance Selection | - | D | - | V | - | T | ||
D | V | |||||||||
SWSC | - | G | H | - | D10.0 | - | V4.0 | - | T1.0 |
Part Number | - | Tolerance Selection | - | D | - | V | - | T | ||
D | V | |||||||||
SWMC | - | G | H | - | D10.0 | - | V4.0 | - | T1.0 |
D | D Tolerance Selection | |||
G | H | N | X | |
g6 | h7 | - | - | |
5.0~8.5 | - | - | -0.1 -0.3 | 0 -0.2 |
9.0~10.0 | -0.005 | 0 | ||
-0.014 | -0.015 | |||
10.5~18.0 | -0.006 | 0 | ||
-0.017 | -0.018 | |||
18.5~30 | -0.007 | 0 | ||
-0.020 | -0.021 | |||
31~50 | -0.009 | 0 | ||
-0.025 | -0.025 | |||
51~60 | -0.010 | 0 | ||
-0.029 | -0.030 |
V | V Tolerance Selection | ||
H | N | X | |
H7 | - | - | |
3.0 | +0.010 | +0.3 +0.1 | +0.2 0 |
0 | |||
3.5~6.0 | +0.012 | ||
0 | |||
6.5~10.0 | +0.015 | ||
0 | |||
10.5~18.0 | +0.018 | ||
0 | |||
18.5~30.0 | +0.021 | ||
0 | |||
30.5~50.0 | +0.025 | ||
0 | |||
50.5~58.0 | +0.030 | ||
0 |
D (O.D.) | V (I.D.) | Price No. |
G | H | |
N | ||
X | ||
H | H | |
N | ||
X | ||
N | H | |
N | ||
X | ||
X | H | |
N | ||
X |
Part Number | D Tolerance Selection | V Tolerance Selection | D | V 0.5mm Increment | T 0.1mm Increment | Unit Price | |||||||||||
SWSC | SWSB | SWSM | SWSS | ||||||||||||||
Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | ||||||
SWSC SWSB SWSM SWSS | G H N X | H N X | 5.0~10.0 0.5mm Increment | 3.0~58.0 (VD-2) Refer to the following. | 1.0~ 2.9 | - | - | - | |||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
10.5~20.0 0.5mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
21~30 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
31~40 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
41~50 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
51~60 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
T3 for SWSS No specification available for sizes without declaration of value. | D9 is applicable when G or H is selected as the tolerance values of D and V. The dimension ranges
of V and T are shown in the table below.
|
Part Number | D Tolerance Selection | V Tolerance Selection | D | V 0.5mm Increment | T 0.1mm Increment | Unit Price | |||||||||||
SWMC | SWMB | SWMM | SWMS | ||||||||||||||
Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | ||||||
SWMC SWMB SWMM SWMS | G H N X | H N X | 5.0~10.0 0.5mm Increment | 3.0~58.0 (VD-2) Refer to the following. | 1.0~ 2.9 | - | - | - | |||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
10.5~20.0 0.5mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
21~30 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
31~40 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
41~50 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
51~60 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
T3 for SWMS No specification available for sizes without declaration of value. | D9 is applicable when G or H is selected as the tolerance values of D and V. The dimension ranges of V and T are shown in the table below.
|