We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand in Saudi Arabia. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SBQM50
Description
Brackets for Device Stands/Square Standard/Tapped
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
| Type | Material | Surface Treatment | Accessory | |
| Counterbored Hole | Tapped Hole | |||
| SAQB | SBQB | General Structural Steel | Black Oxide | Hex Socket Head Cap Screw |
| SAQM | SBQM | Electroless Nickel Plating | Hex Socket Head Cap Screw (Stainless Steel) | |
| SAQS | - | EN 1.4301 Equiv. | - |
| Part Number |
| SAQB20 SBQBK30 |
| Part Number | A | B | C | F | f1 | f2 | f3 | G | b | b1 | h | m | H | MA | X | S | d | d1 | Z | W | Included Screw | |||
| Type | DH7 | |||||||||||||||||||||||
| Counterbored Hole SAQB SAQM SAQS | Tapped Hole SBQB SBQM | 10 | +0.015 0 | 40 | 20 | 19 | 28 | 9 | 19 | 6 | 11 | 5 | 8 | 4.6 | M4 | 9 | M4 | 4.75 | 9.5 | 5 | 8 | 4.6 | 2 | M4-15, 2 pcs. |
| 12 | +0.018 0 | 42 | 30 | 10 | 20 | 10 | ||||||||||||||||||
| 15 | 50 | 22 | 21 | 38 | 14 | 24 | 12 | 6 | 9.2 | 5.5 | M5 | 12 | M5 | 5.5 | 10 | 6 | 9.5 | 5.5 | M5-15, 2 pcs. | |||||
| 20 | +0.021 0 | 60 | 30 | 29 | 45 | 17.5 | 27.5 | 7.5 | 16 | 7 | 11 | 6.5 | M6 | 15 | M6 | 7 | 15 | 7 | 11 | 6.5 | M6-20, 2 pcs. | |||
| 25 | 65 | 35 | 34 | 50 | 20 | 30 | 20 | 17 | 20 | M6-25, 2 pcs. | ||||||||||||||
| 30 | 80 | 45 | 44 | 60 | 22.5 | 37.5 | 10 | 25 | 9 | 14 | 9 | M8 | 21 | M8 | 9.5 | 25 | 9 | 14 | 9 | M8-30, 2 pcs. | ||||
| 35 | +0.025 0 | 85 | 50 | 49 | 65 | 25 | 40 | 30 | 24 | 30 | 3 | M8-35, 2 pcs. | ||||||||||||
| 40 | 100 | 60 | 59 | 75 | 30 | 45 | 12.5 | 35 | 11 | 17.5 | 11 | M10 | 26 | 12 | 35 | M8-40, 2 pcs. | ||||||||
| 50 | 110 | 70 | 69 | 85 | 32.5 | 52.5 | 45 | 33 | M10 | 14.5 | 40 | 11 | 17.5 | 11 | M10-50, 2 pcs. | |||||||||
| The tolerance and perpendicularity of DH7 are before slitting. For mating, g6, f8 shaft tolerances are recommended. For Stand for Posts, see P.2143 and 2144. Tightening with a long wrench is recommended. |
