We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand in Saudi Arabia. The private labels and part numbers shown on this website are the property of their respective owners.
Type | Material | Surface Treatment | Accessory | ||
Side Mounting, Casting, | Side Mounting, Casting, Dowel Holes | Side Mounting, Casting, | Side Mounting, Casting, Dowel Holes | ||
CLTBD | CLPBD | EN-JS 1040 Equiv. | Black Oxide or Phosphate Conversion Coating | Hex Socket Head Cap Screw | Hex Socket Head Set Screw Dowel Pin |
CLTMD | CLPMD | Electroless Nickel Plating | Hex Socket Head Cap Screw (Stainless Steel) | Hex Socket Head Cap Screw (Stainless Steel) Dowel Pin |
DH7 | Accessory: Dowel Pin |
20 | MSTM6-20 |
25 | MSTM8-20 |
30 | |
35 | MSTM10-30 |
40 | |
50 |
Part Number |
CLTBD20 CLPMD30 |
over | or Less | Tolerance |
10 | 16 | �2.2 |
17 | 25 | �2.3 |
26 | 40 | �2.5 |
41 | 63 | �2.8 |
64 | 100 | �3.0 |
101 | 160 | �3.5 |
Part Number | A | B | L | T | F | G | K | J | h | H | E | d | d1 | Z | MA | W | With Dowel Holes | Included Screw | Unit Price | ||||||
PH7 | Tolerance | Side Mounting, Casting | Side Mounting, Casting, Dowel Holes | ||||||||||||||||||||||
Type | DH7 | CLTBD | CLTMD | CLPBD | CLPMD | ||||||||||||||||||||
Side Mounting, Casting, CLTBD CLTMD Side Mounting, Casting, Dowel Holes CLPBD CLPMD | 20 | +0.021 0 | 65 | 45 | 45 | 12 | 50 | 25 | 6.6 | 13 | 22 | 15 | 30 | 6.6 | 11 | 6.5 | M6 | 2 | 6 | +0.012 0 | M6-20, 2 pcs. | ||||
25 | 80 | 60 | 53 | 60 | 36 | 9 | 18 | 27 | 18 | 35 | 8 | +0.015 0 | M6-25, 2 pcs. | ||||||||||||
30 | 90 | 60 | 15 | 70 | 30 | 21 | 45 | 9 | 14 | 9 | M8 | M8-35, 2 pcs. | |||||||||||||
35 | +0.025 0 | 105 | 80 | 68 | 80 | 40 | 11 | 20 | 35 | 24 | 50 | 3 | 10 | M8-40, 2 pcs. | - | - | |||||||||
40 | 115 | 76 | 90 | 38 | 27 | 60 | 11 | 17.5 | 11 | M10 | M10-45, 2 pcs. | - | - | ||||||||||||
50 | 135 | 100 | 87 | 18 | 105 | 50 | 14 | 24 | 43 | 33 | 70 | M10-50, 2 pcs. | - | - | |||||||||||
The tolerance and perpendicularity of DH7 are before slitting. For mating, g6, f8 shaft tolerances are recommended. For Stand for Posts, see P.2143 and P.2144. Tightening with a long wrench is recommended. D=30 or less are applicable to CLPBD and CLPMD. |