We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand in Saudi Arabia. The private labels and part numbers shown on this website are the property of their respective owners.
Type | Material | Surface Treatment | Accessory | ||
Side Mounting | Side Mounting, Dowel Hole | Side Mounting | Side Mounting, Dowel Hole | ||
CLTB | CLPK | Steel for General Structure | Black Oxide | Hex Socket Head Cap Screw | Hex Socket Head Set Screw Dowel Pin |
CLTM | CLPM | Electroless Nickel Plating | Hex Socket Head Cap Screw (Stainless Steel) | Hex Socket Head Cap Screw (Stainless Steel) Dowel Pin | |
CLTBM | - | Aluminum Alloy | Black Anodize | Hex Socket Head Cap Screw | - |
CLTAM | - | Clear Anodize | Hex Socket Head Cap Screw (Stainless Steel) | ||
CLTS | - | EN 1.4301 Equiv. | - |
DH7 | Accessory: Dowel Pin |
20 | MSTM6-20 |
25 | MSTM8-20 |
30 | |
35 | MSTM10-30 |
40 | |
50 |
Part Number |
CLTB35 CLPM30 |
Part Number | A | B | L | T | F | G | K | h | H | E | d | d1 | Z | MA | W | PH7 | Included Screw | Unit Price | ||||||||||
Side Mounting | Side Mounting, Dowel Hole | |||||||||||||||||||||||||||
Type | DH7 | Tolerance | CLTB | CLTM | CLTBM | CLTAM | CLTS | CLPK | CLPM | |||||||||||||||||||
Side Mounting CLTB CLTM CLTBM CLTAM CLTS | Side Mounting, Dowel Holes CLPK CLPM | 10 | +0.015 0 | 40 | 35 | 32 | 10 | 30 | 18 | 4.4 | 15 | 10.5 | 20 | 5 | 8 | 4.5 | M4 | 2 | - | - | M4-15, 2 pcs. | - | - | |||||
12 | +0.018 0 | 44 | 34 | 5.5 | 14 | 11.5 | 22 | 5.5 | 9 | 5.5 | M5 | M5-15, 2 pcs. | - | - | ||||||||||||||
15 | 50 | 40 | 38 | 12 | 38 | 20 | 6.6 | 18 | 12.5 | 25 | 6.6 | 11 | 6.5 | M6 | M6-15, 2 pcs. | - | - | |||||||||||
16 | M6-15, 2 pcs. | - | - | - | ||||||||||||||||||||||||
20 | +0.021 0 | 65 | 45 | 45 | 12 | 50 | 25 | 6.6 | 22 | 15 | 30 | 6.6 | 11 | 6.5 | M6 | 2 | 6 | +0.012 0 | M6-20, 2 pcs. | |||||||||
25 | 80 | 60 | 53 | 60 | 36 | 9 | 27 | 18 | 35 | 8 | +0.015 0 | M6-25, 2 pcs. | ||||||||||||||||
30 | 90 | 60 | 15 | 70 | 30 | 21 | 45 | 9 | 14 | 9 | M8 | M8-35, 2 pcs. | ||||||||||||||||
35 | +0.025 0 | 105 | 80 | 68 | 15 | 80 | 40 | 11 | 35 | 24 | 50 | 9 | 14 | 9 | M8 | 3 | 10 | +0.015 0 | M8-40, 2 pcs. | - | ||||||||
40 | 115 | 76 | 90 | 38 | 27 | 60 | 11 | 17.5 | 11 | M10 | M10-45, 2 pcs. | - | ||||||||||||||||
50 | 135 | 100 | 87 | 18 | 105 | 50 | 14 | 43 | 33 | 70 | M10-50, 2 pcs. | - | ||||||||||||||||
The tolerance and perpendicularity of DH7 are before slitting. For mating, g6, f8 shaft tolerances are recommended. For Stand for Posts, see P.2143 and P.2144. Tightening with a long wrench is recommended. CLTS is applicable up to D=30, and CLPK and CLPM are available from D=20 and up. D=16 of CLTBM is not available. |