Resistor RMT RFC ItalOhm
Resistor RMT RFC ItalOhm

We are not the manufacturer, authorised distributor or authorised representative of the ItalOhm brand in Saudi Arabia. The private labels and part numbers shown on this website are the property of their respective owners.

ItalOhm RMT RFC

Manufacturer

ItalOhm

Country

Italy

Name

RMT RFC

Category

Resistors

Type

Resistor

Description

Grounding Resistor Wire

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications RMT RFC

The purpose of an earth resistor of the star centre is to protect transformers and generators from short circuits between phases and between phases and the earth connection. In fact, when a resistor is inserted between the star and the earth connection the short circuit current is limited to a pre-set value that does not damage the equipment connected. Additionally, the use of the resistor has the following advantages over other systems: It minimizes damage caused by mono phase failures at the earth connection It prevents the formation of temporary overloads; It limits the electro dynamic strain deriving from external breakdowns (in the network and down line); It decreases needless interruptions by protective devices. OFEL RMT resistors are robustly built earth connection resistors produced with materials that guarantee high dependability; the stainless steel protective casing, the support in thermo electric material, the ceramic insulators confer the RMT product with robustness, a high degree of insulation and make them non-inflammable. Additionally, the FeCrAl alloy used for the winding guarantees limited resistance variations, maintaining current veritably constant during use. RMT resistors are now a consolidated OFEL product, thanks to the experience acquired over the years, and have achieved a standard configuration that is developed in height in order to contain space required inside electric panels and cabinets. The groups may start from a base of three or four elements and be developed in height up to 20 elements (max. 5 levels). Each level is insulated with ceramic insulators that have a guarantee for the required insulation class.

Features RMT RFC

· Tolerance on resistance value ±5% · Low temperature coefficient ohm values 12 ppm · High Ohm values 70 ppm · Maximum utilisation temperature 55+350 [°C] · Insulation current depends on requirements · Minimum resistance value 1W x n° elements [W] · Maximum resistance value 27kW x n° elements [W] · Level of protection (IEC 529) IP 00 · Temperature reached on wire at end of transit less than 450 [°K]