Structure and attachments
1) |
Motor attachment – flanged type and coupling |
2) |
Motor attachment – timing belt side drive |
Structural design
1 Ball Screw Assembly with zero-backlash Single Nut
2Drive-side end block
3Carriage with integrated Runner Block
4 Cover plate
5Cover strip made of reinforced PU strip
6 End block
7 Frame
Attachments:
8 Connection plate
9 Magnetic sensor
10 Mounting channel
11 Socket/plug
12 Flange and coupling
13 Belt side drive
14 Motor
Attachments
- Motor attachments with mount and coupling or via timing belt side drive
- Mounting kits for motors according to customer requirements
- Maintenance-free servomotors with selectable brake and mounted feedback
- Magnetic sensors, switch activation without additional switch tag
- Aluminum mounting channel for sensors
Motor attachment with flange and coupling
A motor can be attached to all Compact Modules with Ball Screw Assembly by means of a flange and coupling.
The flange serves to fasten the motor to the Compact Module and acts as a closed housing for the coupling.
The motor’s drive torque is transmitted stress-free through the coupling to the Compact Module’s drive shaft.
Our standard couplings compensate for the system’s thermal expansion.
1) |
Motor |
2) |
Flanged type |
3) |
Coupling |
4) |
Compact module |
Structural design belt side drive
All Compact Modules with Ball Screw Assembly offer the option of attaching the motor via a belt side drive. This makes the overall length shorter than when attaching the motor with flange and coupling. The space-saving, closed pulley housing serves as protection for the belt and as a motor bracket.
In addition, various gear ratios are also available (depending on size):
The belt side drive can be mounted in four different directions:
- below, above (RV01 and RV02)
- left, right (RV03 and RV04)
1) Pulley housing made of anodized aluminum frame
2) Compact Module
3) Support bearing on screw journal with size CKK-070
4) Timing belt
5) Motor
6) Timing belt
7) Cover
8) Belt pulleys with tensioning units
9) Cover plate
Design/options for guideway (frame), carriages, connection plates, see section “Dimensions”
1) |
Guideway (frame) |
2) |
Carriages |
3) |
Connection plates |
1) |
Mount and coupling (MF01) |
2) |
Timing belt side drive (RV01–RV04) |
1 Linear Motion System
2 Motor
3 Motor connector
4 Mount and coupling
5 Timing belt side drive
Lubrication versions
Lube version LSS, LPG
- Grease lubrication with manual grease gun via frame, carriage or via connection plate
A Drive side
Notes:
LSS:
- Initial lubrication by Bosch Rexroth
- Relubrication using manual grease gun
LPG:
- Ball Rail System and Ball Screw Assembly only with corrosion prevention
- Relubrication using manual grease gun
- Basic lubrication required