We are not the manufacturer, authorised distributor or authorised representative of the Bosch Rexroth brand in Saudi Arabia. The private labels and part numbers shown on this website are the property of their respective owners.
Bosch Rexroth R901423298
Manufacturer
Bosch Rexroth
Country
Germany
Part number
R901423298
Category
Gear pumps
Type
Gear pump
Stock availability:
On request
Price: On request
On request
Order
Several positions are needed?
Send your request on email:
Worldwide delivery services:
Ways of payment:
Specifications R901423298
Set-up
Hydraulic pumps of type PGH.-3X are gap-compensated internal gear pumps with constant displacement.
They basically comprise of: Mounting flange (1), housing (2), cover with through-drive (3), pinion shaft (4), internal gear (5), plain bearings (6), axial washers (7) and stop pin (8) as well as the radial compensation consisting of segment (9), segment support (10) and the seal rolls (11).
Suction and displacement procedure
The hydrodynamically mounted pinion shaft (4) drives the internally geared internal gear (5) in the direction of rotation shown.
The tooth clearances opening in the suction range suck in the fluid. The fluid is transported into the tooth clearances of pinion and internal gear, from the suction range (S) into the pressure range (P).
There, the fluid is displaced from the closing tooth clearances and delivered into the pressure port (P).
Suction and pressure range are separated by the radial compensation elements (9 to 11) and the tooth engagement between internal gear and pinion shaft.
Axial compensation
The displacement area in the pressure range is axially sealed by axial washers (7).
To the sides of the axial washers facing away from the displacement area a pressure field (12) is applied. These fields balance the axial washers vis-à-vis the displacement area, which results in a perfect sealing with low mechanical losses.
Radial compensation
The radial compensation elements consist of segment (9), segment support (10) and seal rolls (11).
Segment (9) and segment support (10) are arranged in the pressure field so that the resulting compressive force is basically accepted by the stop pin.
A small compressive force component presses segment and segment support onto the tooth tips of pinion shaft and internal gear and in this way provides for the sealing of the pressure range to the suction range with automatic clearance adjustment.
This is the prerequisite for constantly high volumetric efficiency during the entire operating time.
The clearance adjustment of segment and segment support is made possible by the seal rolls located inbetween.
Hydrodynamic and hydrostatic mounting
The pinion shaft (4) is accepted by hydrodynamically lubricated radial plain bearings (6).
The internal gear (5) is mounted hydrostatically in the housing.
Gear tooth system
The gear tooth system with involute edges has a large meshing length for little flow and pressure pulsation and thus guarantees low-noise running.
Features R901423298
Frame size 4, 5
Size 20 … 250
Component series 3X
Maximum operating pressure 350 bar
Maximum displacement 250.5 cm³
Invite to the tender
Our Manager will contact you soon.
The request has been sent
The request has been sent
The message hasn't been sent
The message hasn't been sent
Send a request
We will contact with you and answer to all your questions
Thank you for your request!
While we are processing your request you can find other required goods. Indeed, there are more than 10 000 brands in our catalogue
By ordering several items from us at once, you will significantly save on delivery!